Bose Portable PA Knowledge

LR Baggs Session DI to ToneMatch Mixer T1/T4S/T8S: Difference between revisions

← Older editNewer edit →
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
mNo edit summary
mNo edit summary
Line 6: Line 6:
</div>   
</div>   


=== Connections and Phantom Power ===
== Connections and Phantom Power ==


You have the option to connect the LR Baggs Session DI to the T4S using an XLR or 1/4 inch (6.3 mm) Tip-Sleeve cable.
You have the option to connect the LR Baggs Session DI to the T4S using an XLR or 1/4 inch (6.3 mm) Tip-Sleeve cable.
Line 13: Line 13:




===LR Baggs Session DI Settings===
==LR Baggs Session DI Settings==
#    Follow the instructions for setting the GAIN control
#    Follow the instructions for setting the GAIN control
:B. Gain Setting
:B. Gain Setting
Line 19: Line 19:
#Follow the instructions for setting the other controls on the LR Baggs Session DI
#Follow the instructions for setting the other controls on the LR Baggs Session DI


===T4S/T8S or T1 ToneMatch Mixer===
==T4S/T8S or T1 ToneMatch Mixer==
#    Before making any connections, turn down the Master Output
#    Before making any connections, turn down the Master Output
#    If you are using the Phantom Power, turn down the Master Output before turning on the Phantom Power
#    If you are using the Phantom Power, turn down the Master Output before turning on the Phantom Power
Line 34: Line 34:
#*Make changes to only one feature at a time and use the Bypass feature (it's called Mute, for Reverb) to compare the sound with and without and effect
#*Make changes to only one feature at a time and use the Bypass feature (it's called Mute, for Reverb) to compare the sound with and without and effect


<!--
 
*Before making any connections, turn down the Master Output</li>
<li>If you are using the Phantom Power, turn down the Master Output before turning on the Phantom Power</li><li>Connect the LR Baggs Session DI to one of the channels 1, 2, 3, or 4</li><li>Set the channel's Trim Control <ul><li>Play the guitar as loud as you will during the performance and set the trim control so you see solid green (occasional flickers of red). If you see solid red, turn down the trim</li></ul></li><li>Press the CH EDIT button for the channel to which you have connected the LR Baggs Session DI</li>
*Set the ToneMatch Preset to<br>Category: Acoustic Guitars<br>Preset: Flat, A. Guitar zEQ</p></li>
<li>Bypass the zEQ, ParaEQ, COMP/GATE, MOD, DELAY, and REVERB settings and use the controls on the LR Baggs Session DI to get the best sound you can</li>
*Turn up the Channel and Master Volume controls so you can hear the guitar</li>
<li>Add zEQ, ParaEQ, COMP/GATE, MOD, DELAY, and REVERB only after getting the best sound possible without them. Make changes to only one feature at a time and use the Bypass feature (it's called Mute, for Reverb) to compare the sound with and without and effect</li>
</ul>
-->




Retrieved from "https://boseperformer.com/LR_Baggs_Session_DI_to_ToneMatch_Mixer_T1/T4S/T8S"