Template:T8S Mono Output: Difference between revisions

Line 1:

== Mono Output ==

On the back of {{ToneMatch Mixer}}s, there is an indication below the Right output (MONO).

;Please note: There is no hardwired summed mono output on the ToneMatch mixers. Any input signal that is panned hard Left will not be heard through the Right output. To get a mono output please see below.

;Please note: There is no hardwired summed mono output on the ToneMatch mixers.

* '''T4S''' Any input signal that is panned hard Left will not be heard through the Right output.

* '''T8S''' Any input signal that is panned hard Right will not be heard through the Left output.

To get a mono output, please see below.

=== General Information ===

Line 8:

Line 12:

===T8S ToneMatch® mixer===

*Pan all inputs hard ~~RIGHT~~

*Pan all inputs hard LEFT

*Use the ¼ inch (6mm) ~~Right~~ Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve cable

*Use the ¼ inch (6mm) Left Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve cable

OR

*Use the XLR ~~Right~~ Output to powered a loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve.

*Use the XLR Left Output to a powered loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve.

;Note: Anything panned hard ~~LEFT~~ will not be heard at the ~~RIGHT~~ Output.

;Note: Anything panned hard RIGHT will not be heard at the LEFT Output.

=== Mono using Aux Output ===

You can create a summed mono output by directing your input channels (1-8) to an Aux Output. See [[T4S/T8S_ToneMatch®_Mixer#Aux Outputs|Aux Outputs]] for details.

@@ Line 1: / Line 1: @@
 == Mono Output ==
 On the back of {{ToneMatch Mixer}}s, there is an indication below the Right output (MONO).
-;Please note: There is no hardwired summed mono output on the ToneMatch mixers. Any input signal that is panned hard Left will not be heard through the Right output.  To get a mono output please see below.
+;Please note: There is no hardwired summed mono output on the ToneMatch mixers.
+* '''T4S''' Any input signal that is panned hard Left will not be heard through the Right output.
+* '''T8S''' Any input signal that is panned hard Right will not be heard through the Left output.
+To get a mono output, please see below.
 === General Information ===
@@ Line 8: / Line 12: @@
 ===T8S ToneMatch® mixer===
-*Pan all inputs hard RIGHT
+*Pan all inputs hard LEFT
-*Use the ¼ inch (6mm) Right Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve&nbsp;cable
+*Use the ¼ inch (6mm) Left Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve&nbsp;cable
 OR
-*Use the XLR Right Output to powered a loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve.
+*Use the XLR Left Output to a powered loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve.
-;Note: Anything panned hard LEFT will not be heard at the RIGHT Output.
+;Note: Anything panned hard RIGHT will not be heard at the LEFT Output.
 === Mono using Aux Output ===
 You can create a summed mono output by directing your input channels (1-8) to an Aux Output. See [[T4S/T8S_ToneMatch®_Mixer#Aux Outputs|Aux Outputs]] for details.