T4S/T8S ToneMatch® Mixer: Difference between revisions
| Line 85: | Line 85: | ||
== Mono Output == | == Mono Output == | ||
On the back of ToneMatch mixers there is an indication below the Right output (MONO). This is a misprint. There is no hardwired summed mono output on the ToneMatch mixers. To get a mono output please see below. | On the back of ToneMatch mixers, there is an indication below the Right output (MONO). This is a misprint. There is no hardwired summed mono output on the ToneMatch mixers. | ||
=== General Information === | |||
As you move the pan control away from the center, the sound level increases slightly in one direction and decreases in the other. If you pan inputs hard to one side (e.g., Right) and the Right output will be slightly louder (theoretically, up to +3 dB louder) than if you had panned the inputs up the middle. And panned hard Right - there will be no signal at the Left Output. | |||
To get a mono output please see below. | |||
===T4S ToneMatch® mixer=== | ===T4S ToneMatch® mixer=== | ||
Pan all inputs hard RIGHT | *Pan all inputs hard RIGHT | ||
*Connect your L1® to the RIGHT ToneMatch® port | |||
OR | |||
*Use the ¼ inch (6mm) Right Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve cable. | |||
;Note: Anything panned hard LEFT will not be heard at the RIGHT Output. | |||
===T8S ToneMatch® mixer=== | ===T8S ToneMatch® mixer=== | ||
Pan all inputs hard RIGHT | *Pan all inputs hard RIGHT | ||
*Use the ¼ inch (6mm) Right Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve cable | |||
OR | |||
*Use the XLR Right Output to powered a loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve. | |||
;Note: Anything panned hard LEFT will not be heard at the RIGHT Output. | |||
=== Mono using Aux Output === | === Mono using Aux Output === | ||