Dual Mono: Difference between revisions - Bose Portable PA Knowledge

Line 1:

<div>

<div style="float:right;">[[File:L1ModelIISingleB1.png]][[File:L1ModelIISingleB1.png]]</div>

This article pertains to Dual Mono with {{L1}} systems.

: The {{L1}} systems have extremely wide horizontal dispersion. As a result, running multiple {{L1}} systems in the same sound field may result in overlap. The comments below are applicable in that context.

The {{L1}} systems have extremely wide horizontal dispersion. As a result, running multiple {{L1}} systems in the same sound field may result in overlap. The comments below are applicable in that context.

The {{F1}} and {{S1}} systems have narrower horizontal dispersion. If you space those systems apart or aim them to avoid overlap, this article is not applicable to non-{{L1}} systems.

</div>

~~== Introduction ==~~

==Dual Mono==

Line 18:

Line 20:

Hilmar-at-Bose wrote:

:Dual mono (with the {{L1}} systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization ~~helps~~ more with clarity much more than the added gain.

:Dual mono (with the {{L1}} systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization help more with clarity much more than the added gain.

:For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at the performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent.

@@ Line 1: / Line 1: @@
 {{Model II icon}}{{Compact icon}}
 <div class="tocdiv">
-     <div>__TOC__</div>
+     <div style="max-height:100%">__TOC__</div>
-     <div>
+     <div style="max-height:100%">
+<div style="float:right;">[[File:L1ModelIISingleB1.png]][[File:L1ModelIISingleB1.png]]</div>
 This article pertains to Dual Mono with {{L1}} systems.
-: The {{L1}} systems have extremely wide horizontal dispersion. As a result, running multiple {{L1}} systems in the same sound field may result in overlap. The comments below are applicable in that context.
+The {{L1}} systems have extremely wide horizontal dispersion. As a result, running multiple {{L1}} systems in the same sound field may result in overlap. The comments below are applicable in that context.
+The {{F1}} and {{S1}} systems have narrower horizontal dispersion. If you space those systems apart or aim them to avoid overlap, this article is not applicable to non-{{L1}} systems.
      </div>
 </div>
-== Introduction ==
 ==Dual Mono==
@@ Line 18: / Line 20: @@
 Hilmar-at-Bose wrote:
-:Dual mono (with the {{L1}} systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization helps more with clarity much more than the added gain.
+:Dual mono (with the {{L1}} systems) is usually not a good idea, if you have more than one performer. With more than one performer/source it's in my opinion always preferable to separate the sources (i.e. one source per L1). The spatial separation and precise localization help more with clarity much more than the added gain.
 :For a single performer/single source it's not quite so clear cut. One will be more accurate (i.e. sound is clearly located at the performer's position, more consistent spectrum) and two will sound wider and more spacious. In the end, that is an artistic decision, depending on which one is closer to your artistic intent.