S1 Pro to L1 Model I: Difference between revisions
Created article |
m added images |
||
| Line 7: | Line 7: | ||
Connect {{S1}} to {{Model I}} | Connect {{S1}} to {{Model I}} | ||
You can connect to the S1 Pro system as you would when using it alone. Then run a cable from the S1 Pro Line Out to any of the 1/4" inputs on the L1 Model I. You can use an ordinary Tip-Sleeve instrument cable. | You can connect to the S1 Pro system as you would when using it alone. Then run a cable from the S1 Pro Line Out | ||
{{S1 Pro Line Out}} | |||
to any of the 1/4" inputs on the L1 Model I. You can use an ordinary Tip-Sleeve instrument cable. | |||
[[File:L1 Model I 14 inputs.jpg]] | |||
If you use the L1 Model I inputs on channels 1 or 2, set the Preset to 00. Set the input trim so that when you are running the S1 Pro at the loudest you will perform, the L1 Model I Signal/OL lights are solid green. Occasional red flickers are okay. | If you use the L1 Model I inputs on channels 1 or 2, set the Preset to 00. Set the input trim so that when you are running the S1 Pro at the loudest you will perform, the L1 Model I Signal/OL lights are solid green. Occasional red flickers are okay. | ||
[[File:SignalOLLED.png]] | |||