S1 Pro System Line Out: Difference between revisions

Line 1:

¼ inch (6mm) Tip-Ring-Sleeve jack: Nominal +2.4 dBu, Max +20 dBu

=== Overview and Specifications ===

; The {{S1}} Line Out is

:¼ inch (6mm) Tip-Ring-Sleeve jack: Nominal +2.4 dBu, Max +20 dBu

Output Impedance: 9.4 kilo-ohm kΩ

:Output Impedance: 9.4 kilo-ohm kΩ

Note: Using a Tip-Sleeve unbalanced cable will result in a drop in the audio level of -6dBu.

:Note: Using a Tip-Sleeve unbalanced cable will result in a drop in the audio level of -6dBu.

Note: There is no limiter on this output so you may get more than the rated maximum, but it could sound distorted.

:Note: There is no limiter on this output so you may get more than the rated maximum, but it could sound distorted.

=== S1 Pro Daisy Chain (one to another) ===

=== Connecting to a Third Party ~~Mixer~~ ===

=== Connecting the {{S1}} to a Third Party Device ===

If another device has a 1/4 inch (6 mm) input, and you don't know if it's balanced or unbalanced, it's usually okay to use a Tip-Sleeve cable. If that connection is balanced, then a Tip-Ring-Sleeve cable is a better choice. If you don't know for sure and don't have time to test, use the Tip-Sleeve cable.

~~Most mixers will accept an unbalanced, line-level device. If you use a Tip-Sleeve cable from the~~ S1 Pro ~~system Line Out, that's what you've got - an unbalance, line-level device.~~

~~Fewer mixers will accept~~ a ~~balanced line-level device. If you use a Tip-Ring-Sleeve cable from the S1 Pro system Line Out, then the connection is balanced.~~

----

[[Category:S1]]

[[Category:Connections]]

@@ Line 1: / Line 1: @@
-¼ inch (6mm) Tip-Ring-Sleeve   jack: Nominal +2.4 dBu, Max +20 dBu
+=== Overview and Specifications ===
+; The {{S1}} Line Out is
+:¼ inch (6mm) Tip-Ring-Sleeve   jack: Nominal +2.4 dBu, Max +20 dBu
-Output Impedance: 9.4 kilo-ohm kΩ
+:Output Impedance: 9.4 kilo-ohm kΩ
-Note: Using a Tip-Sleeve unbalanced cable will result in a drop in the audio level of -6dBu.
+:Note: Using a Tip-Sleeve unbalanced cable will result in a drop in the audio level of -6dBu.
-Note: There is no limiter on this output so you may get more than the rated maximum, but it could sound distorted.
+:Note: There is no limiter on this output so you may get more than the rated maximum, but it could sound distorted.
 === S1 Pro Daisy Chain (one to another) ===
 {{:S1 Pro Daisy Chain Settings}}
-=== Connecting to a Third Party Mixer ===
+=== Connecting the {{S1}} to a Third Party Device ===
+{{:S1 Pro to a Third Party Device}}
-If another device has a 1/4 inch (6 mm) input, and you don't know if it's balanced or unbalanced, it's usually okay to use a Tip-Sleeve cable.  If that connection is balanced, then a Tip-Ring-Sleeve cable is a better choice. If you don't know for sure and don't have time to test, use the Tip-Sleeve cable.
-Most mixers will accept an unbalanced, line-level device. If you use a Tip-Sleeve cable from the S1 Pro system Line Out, that's what you've got - an unbalance, line-level device.
-Fewer mixers will accept a balanced line-level device. If you use a Tip-Ring-Sleeve cable from the S1 Pro system Line Out, then the connection is balanced.
 ----
 [[Category:S1]]
 [[Category:Connections]]