T1 ToneMatch® Audio Engine with Compact for Karaoke: Difference between revisions

Line 122: Line 122:


== Controlling the Volume ==
== Controlling the Volume ==
If you have set the T1® Trim Controls as described above, you should not have to change them again unless you change microphones or the source for Channel 4/5.


Start with all of the T1® Volume Controls at zero.


Connect TO the Compact Channel 2 volume straight up (12:00 o'clock) for good results. You can turn it up higher, but if you see the light on the Compact flickering red, turn down the volume on the Compact.
;Overview
: Use the T1® Channel 1, 2, 3, 4/5 Volume controls to set the relative volume between the vocals and the background music.
: Use the T1® Master Volume to control the overall volume in the room.
# Play some music through T1® Channel 4/5.
# Turn up Channel 4/5 Volume to 12:00 o'clock
# Turn up the Master Volume to a comfortable listening level.
# Turn up Channel 1 (or 2 or 3) Volume and sing.
#* Set the relative volume between the microphone and the music to get a good sounding mix so you can hear the vocals well above the music.
#* If you have more than one microphone bring up the Channel volume for a suitable mix.
# Adjust the Master Volume for the overall volume required.


----
----