T1 ToneMatch® Audio Engine to F1 System: Difference between revisions
m New page: {{T1 icon}}{{F1 icon}} === Mono Connection === This describes how you can run an {{Model II}} or {{Model 1S}} with a {{T1}} and run one or more {{F1}} at the same time. To connect a {{T1... |
mNo edit summary |
||
| Line 8: | Line 8: | ||
[[Image:T1 to F1 Model 812 Mono.png]] | [[Image:T1 to F1 Model 812 Mono.png]] | ||
'''For best results use a balanced | '''For best results use a balanced connections | ||
; ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)''' | ; ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)''' | ||
| Line 17: | Line 17: | ||
The output from the T1® is balanced mono, as are the XLR and ¼ inch inputs on the F1 System. Use a ¼ inch jack Tip-Ring-Sleeve cable to make a balanced connection. If you use a ¼ inch jack Tip-Sleeve cable you will be making an unbalanced connection (-6dB less gain than a balanced connection). | The output from the T1® is balanced mono, as are the XLR and ¼ inch inputs on the F1 System. Use a ¼ inch jack Tip-Ring-Sleeve cable to make a balanced connection. If you use a ¼ inch jack Tip-Sleeve cable you will be making an unbalanced connection (-6dB less gain than a balanced connection). | ||
; XLR connection from {{F1}} Line Out to second {{F1}} Channel 1. | |||
=== Stereo Connection === | |||
If you have split a stereo signal to T1® Master and T1® Aux, the connections will look like this. | |||
[[Image:T1 to F1 Model 812 Stereo.png]] | |||
'''For best results use a balanced connections | |||
; ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)''' | |||
A balanced connection is preferred and will provide better noise rejection over greater distances than the unbalanced connection. | |||
[[Image:TrsMtrsM.png]] | |||
The output from the T1® is balanced mono, as are the XLR and ¼ inch inputs on the F1 System. Use a ¼ inch jack Tip-Ring-Sleeve cable to make a balanced connection. If you use a ¼ inch jack Tip-Sleeve cable you will be making an unbalanced connection (-6dB less gain than a balanced connection). | |||
; XLR connection from {{F1}} Line Out to second {{F1}} Channel 1. | |||