T1® to Denon DN-X500: Difference between revisions

Line 1:

T1® to Denon DN-X500

Connecting an {{T1}} to a Denon DN-X500

Connecting an {{T1}} to a Denon DN-X500. There are three connections on the Denon DN-X500 where you could connect a {{T1}} Master or Aux output.

==== Notes that apply to all three approaches ====

You'll need a [[T1_ToneMatch%C2%AE_Audio_Engine_power_supply|T1 ToneMatch%C2%AE Audio Engine power supply]][[Image:T1_power_supplyThumb.jpg]]

The T1® Master Output is a line level output. You can raise and lower that with the Master Volume control to get a good level match to the input that you use on the Denon-DNX500.

Make the connection with a ¼ inch jack Tip-Ring-Sleeve cable.

[[Image:TrsMtrsM.png]]

~~There are three connections on the Denon DN-X500 where you could connect a {{T1}} Master or Aux output.~~

==== {{T1}} to Denon DN-X500 microphone input ====

Line 14:

Line 23:

[[Image:DN-X500Input4T1.png]]

~~==== Notes that apply to all three approaches ====~~

~~You'll need a [[T1_ToneMatch%C2%AE_Audio_Engine_power_supply|T1 ToneMatch%C2%AE Audio Engine power supply]][[Image:T1_power_supplyThumb.jpg]]~~

~~The T1® Master Output is a line level output. You can raise and lower that with the Master Volume control to get a good level match to the input that you use on the Denon-DNX500.~~

~~Make the connection with a ¼ inch jack Tip-Ring-Sleeve cable.~~

~~[[Image:TrsMtrsM.png]]~~

==== {{T1}} to Denon DN-X500 microphone input ====

@@ Line 1: / Line 1: @@
 T1®  to Denon DN-X500
-Connecting an {{T1}} to a Denon DN-X500
+Connecting an {{T1}} to a Denon DN-X500. There are three connections on the Denon DN-X500 where you could connect a {{T1}} Master or Aux output.
+==== Notes that apply to all three approaches ====
+You'll need a [[T1_ToneMatch%C2%AE_Audio_Engine_power_supply|T1 ToneMatch%C2%AE Audio Engine power supply]][[Image:T1_power_supplyThumb.jpg]]
+The T1® Master Output is a line level output. You can raise and lower that with the Master Volume control to get a good level match to the input that you use on the Denon-DNX500.
+Make the connection with a &frac14; inch jack Tip-Ring-Sleeve cable.
+[[Image:TrsMtrsM.png]]
-There are three connections on the Denon DN-X500 where you could connect a {{T1}} Master or Aux output.
 ==== {{T1}} to Denon DN-X500 microphone input ====
@@ Line 14: / Line 23: @@
 [[Image:DN-X500Input4T1.png]]
-==== Notes that apply to all three approaches ====
-You'll need a [[T1_ToneMatch%C2%AE_Audio_Engine_power_supply|T1 ToneMatch%C2%AE Audio Engine power supply]][[Image:T1_power_supplyThumb.jpg]]
-The T1® Master Output is a line level output. You can raise and lower that with the Master Volume control to get a good level match to the input that you use on the Denon-DNX500.
-Make the connection with a &frac14; inch jack Tip-Ring-Sleeve cable.
-[[Image:TrsMtrsM.png]]
 ==== {{T1}} to Denon DN-X500 microphone input ====