Template:Bass Line Out: Difference between revisions

Line 138:

<!-- Being investigated with Bose

* 40-{{{Crossover|180}}} Hz Bandpass (that is: NO B1 EQ) <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6121039062?r=9441007562#9441007562 intelligent crossover] <br />

Output if no {{B1}}s detected

* 40-{{{Crossover|180}}} Hz with '''B2 EQ applied''' if you have the current [[L1® Model II Power Stand Firmware Updates]]

** If you do not have the current firmware: 40-{{{Crossover|180}}} Hz Bandpass (that is: NO B1 EQ) <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6121039062?r=9441007562#9441007562 intelligent crossover] <br />

A) When there are no bass sources attached, lower the crossover and try to get as much bass out of the L1 as is reasonably feasible (110 Hz) in this case<br />

B) If there are bass sources bring the crossover up to 180 Hz (where the L1 starts to get really efficient) AND adjust the bass gain so that the overall spectral balance is maintained no matter how many bass sources are attached.

@@ Line 138: / Line 138: @@
 <!-- Being investigated with Bose
 <strike>  -->
-* 40-{{{Crossover|180}}} Hz Bandpass (that is: NO B1 EQ) <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6121039062?r=9441007562#9441007562 intelligent crossover] <br />
+Output if no {{B1}}s detected
+* 40-{{{Crossover|180}}} Hz with '''B2 EQ applied''' if you have the current [[L1® Model II Power Stand Firmware Updates]]
+** If you do not have the current firmware: 40-{{{Crossover|180}}} Hz Bandpass (that is: NO B1 EQ) <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/6121039062?r=9441007562#9441007562 intelligent crossover] <br />
 A) When there are no bass sources attached, lower the crossover and try to get as much bass out of the L1 as is reasonably feasible (110 Hz) in this case<br />
 B) If there are bass sources bring the crossover up to 180 Hz (where the L1 starts to get really efficient) AND adjust the bass gain so that the overall spectral balance is maintained no matter how many bass sources are attached.