PS1 Powerstand / Daisy Chain: Difference between revisions
mNo edit summary |
|||
| Line 9: | Line 9: | ||
* In the Channel 1 section run an XLR cable from the Channel 1 Line Out | * In the Channel 1 section run an XLR cable from the Channel 1 Line Out | ||
* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad. | * At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad. | ||
** {{Why -20 dB Pad}} | ** {{Why Use a -20 dB Pad}} | ||
* Connect the [[Pad]] to the second {{PS1}} Channel 1 or 2. | * Connect the [[Pad]] to the second {{PS1}} Channel 1 or 2. | ||
* On the first {{PS1}}, set the input trim appropriately. | * On the first {{PS1}}, set the input trim appropriately. | ||
| Line 30: | Line 30: | ||
* In Channel 2 section run an XLR cable from the Channel 2 Line Out | * In Channel 2 section run an XLR cable from the Channel 2 Line Out | ||
* At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad. | * At the other end of the cable connect a [[Pad]]. The people-at-Bose usually recommend a -20 dBu pad. Some owners have reported success with a -10 dBu pad. | ||
** {{Why Use a -20 dB Pad}} | |||
* Connect the [[Pad]] to the second {{PS1}} Channel 2. | * Connect the [[Pad]] to the second {{PS1}} Channel 2. | ||
* On the first {{PS1}}, set the input trim appropriately. | * On the first {{PS1}}, set the input trim appropriately. | ||