Troubleshooting: Difference between revisions

Line 35:

**Connect your sound source directly to the {{L1 nl}} system. That is: eliminate everything between your instrument or microphone and the {{L1 nl}} System.

***{{Classic}} or {{Model I}} try Power Stand Channels 1 or 2.

***{{Classic}} or {{Model I}} remove anything connected to the Channel 1 or Channel 2 insert points.

***{{Model II}} and a {{T1}} try Channels 1,2,3

***{{Model II}} and no {{T1}} try the Analog Input. Your signal source must NOT be stereo. See [[Model II#Stereo Source to Power Stand Analog Input?|Model II - Stereo Source to Power Stand Analog Input?]]

Line 58:

Line 59:

*poor connection to the {{R1}}. Reseat the connections at both ends.

{{#lst:{{PAGENAME}}|CheckSource}}

* On the {{Classic}} or {{Model I}} remove anything connected to the Channel 1 or Channel 2 insert points. Retest.

* On the {{Classic}} or {{Model I}} check that the Presets buttons are completely on a Preset. If you have recently changed Presets, go up an then back down again to make sure you are completely dialed in. See: [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/63410054 Preset 56.5] hint from DJ Argyx.

@@ Line 35: / Line 35: @@
 **Connect your sound source directly to the {{L1 nl}} system. That is: eliminate everything between your instrument or microphone and the {{L1 nl}} System.
 ***{{Classic}} or {{Model I}} try Power Stand Channels 1 or 2.
+***{{Classic}} or {{Model I}} remove anything connected to the Channel 1 or Channel 2 insert points.
 ***{{Model II}} and a {{T1}} try  Channels 1,2,3
 ***{{Model II}} and no {{T1}} try the Analog Input. Your signal source must NOT be stereo. See [[Model II#Stereo Source to Power Stand Analog Input?|Model II - Stereo Source to Power Stand Analog Input?]]
@@ Line 58: / Line 59: @@
 *poor connection to the {{R1}}. Reseat the connections at both ends.
 {{#lst:{{PAGENAME}}|CheckSource}}
-* On the {{Classic}} or {{Model I}} remove anything connected to the Channel 1 or Channel 2 insert points. Retest.
 * On the {{Classic}} or {{Model I}} check that the Presets buttons are completely on a Preset. If you have recently changed Presets, go up an then back down again to make sure you are completely dialed in.  See: [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/63410054 Preset 56.5] hint from DJ Argyx.