L1 Cylindrical Radiator® loudspeaker: Difference between revisions

m === Trouble Inserting / Removing Cylindrical Radiator® ===
m move new section up to be with 'assembling the Cylindrical Radiator® '
Line 15: Line 15:
* Be careful how you insert the lower section. If you insert it upside down you may damage the connector in the Power Stand.  
* Be careful how you insert the lower section. If you insert it upside down you may damage the connector in the Power Stand.  
Kyle-at-Bose posted [[:Media:PS1ConnectionDamage.jpg|pictures of damage]].
Kyle-at-Bose posted [[:Media:PS1ConnectionDamage.jpg|pictures of damage]].
=== Trouble Inserting / Removing Cylindrical Radiator® ===
Check the screws shown here. Make sure they are tight.
[[Image:CylindricalRadiatorScrews.jpg]]
Live discussion [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/9601043006 Problem inserting tower in base]


== Bayonet ==
== Bayonet ==
Line 25: Line 31:
Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal. Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>
Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal. Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>


=== Trouble Inserting / Removing Cylindrical Radiator® ===
Check the screws shown here. Make sure they are tight.


[[Image:CylindricalRadiatorScrews.jpg]]
Live discussion [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/9601043006 Problem inserting tower in base]