DJ: Difference between revisions - Bose Portable PA Knowledge

Line 29:

[[Connections / DJ VJ Computer to Model I]]— This article covers connecting devices like a DJ or VJ console to your L1®

== Connect a Computer to {{T1 nl}} Through USB==

You can connection your computer to a {{t1r}} through USB. The default routing sends the USB from Computer to the Master buss. This works fine, and is the default setting. You will want to use your source computer to control the volume, equalization, effects if any. For more notes about USB see: [[T1 ToneMatch® Audio Engine / USB]].

=== Settings USB from Computer to Channel 4/5 ===

If you want more control then you will want to send USB from Computer to {{t1r}} Channel 4/5.

{{:T1 ToneMatch® Audio Engine / USB / USB from Computer to Channel 4/5}}

=== USB and Channel 4/5 Analog at the same time ===

You can connect the USB input to {{t1r}} Channel 4/5 for a stereo source (computer) AND an analog input to {{t1r}} Channel 4/5 at the same time. While it is unlikely you would play both sources simultaneously, you can raise and lower the outputs at the source. This allows you to control the sources applying {{tm}} Presets, EQ, and volume using the Channel 4/5 Vol control.

<noinclude>See: [[{{PAGENAME}}#Settings USB from Computer to Channel 4/5|Settings USB from Computer to Channel 4/5]] (above) for USB setup and [[{{PAGENAME}}#Analog Connection|Analog Connection]] below.

</noinclude>

==== Analog Connection ====

[[Image:T1Channel45Input.png]]

== Connect a single {{T1 nl}} to two {{L1 nl}}s ==

@@ Line 29: / Line 29: @@
 [[Connections / DJ VJ Computer to Model I]]— This article covers connecting devices like a DJ or VJ console to your L1®
+== Connect a Computer to {{T1 nl}} Through USB==
+You can connection your computer to a {{t1r}} through USB. The default routing sends the USB from Computer to the Master buss. This works fine, and is the default setting. You will want to use your source computer to control the volume, equalization, effects if any. For more notes about USB see: [[T1 ToneMatch® Audio Engine / USB]].
+=== Settings USB from Computer to Channel 4/5 ===
+If you want more control then you will want to send USB from Computer to {{t1r}} Channel 4/5.
+{{:T1 ToneMatch® Audio Engine / USB / USB from Computer to Channel 4/5}}
+=== USB and Channel 4/5 Analog at the same time ===
+You can connect the USB input to {{t1r}} Channel 4/5 for a stereo source (computer) AND an analog input to {{t1r}} Channel 4/5 at the same time. While it is unlikely you would play both sources simultaneously, you can raise and lower the outputs at the source. This allows you to control the sources applying {{tm}} Presets, EQ, and volume using the Channel 4/5 Vol control.
+<noinclude>See: [[{{PAGENAME}}#Settings USB from Computer to Channel 4/5|Settings USB from Computer to Channel 4/5]] (above) for USB setup and [[{{PAGENAME}}#Analog Connection|Analog Connection]] below.
+</noinclude>
+==== Analog Connection ====
+[[Image:T1Channel45Input.png]]
 == Connect a single {{T1 nl}} to two {{L1 nl}}s  ==