L1 Loudness Behind: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 7:

If you find the L1 systems too loud when placed behind you, consider using high-quality hearing protection. Putting them beside or ahead of you will make very little difference for frequencies up to 1000 Hz or the sensation of loudness.

If you place the L1 beside you,

If you place the L1 beside you, the sound is very little different from directly in front. This is great for monitoring if you are on a shallow stage.

~~However, behind~~ the L1 system, the sound will sound muffled because the mid-high frequencies are more directional than the lows.

Behind the L1 system, the sound will sound muffled because the mid-high frequencies are more directional than the lows. In testing (below) the difference was about 3 dB SPL (Sound Pressure Level).

;Notes

:This 3 dB difference was measurable in a free field (no walls). When there are walls, the difference is less apparent due to room reflections.

:A change of 3 dB is accepted as the smallest difference in level that is easily heard by most listeners listening to speech or music. It is a slight increase or decrease in volume<ref> [https://www.e2s.com/references-and-guidelines/db-decibel-ratings db Decibel Ratings]</ref>.

Line 48:

Line 51:

*A-weighted and C-weighted (dBA and dBC)

;Notes

:This 3 dB difference was measurable in a free field (no walls). When there are walls, the difference is less apparent due to room reflections.

:A change of 3 dB is accepted as the smallest difference in level that is easily heard by most listeners listening to speech or music. It is a slight increase or decrease in volume<ref> [https://www.e2s.com/references-and-guidelines/db-decibel-ratings db Decibel Ratings]</ref>.

==Further reading==

@@ Line 7: / Line 7: @@
 If you find the L1 systems too loud when placed behind you, consider using high-quality hearing protection. Putting them beside or ahead of you will make very little difference for frequencies up to 1000 Hz or the sensation of loudness.
-If you place the L1 beside you,
+If you place the L1 beside you, the sound is very little different from directly in front. This is great for monitoring if you are on a shallow stage.
-However, behind the L1 system, the sound will sound muffled because the mid-high frequencies are more directional than the lows.
+Behind the L1 system, the sound will sound muffled because the mid-high frequencies are more directional than the lows. In testing (below) the difference was about 3 dB SPL (Sound Pressure Level).
+;Notes
+:This 3 dB difference was measurable in a free field (no walls). When there are walls, the difference is less apparent due to room reflections.
+:A change of 3 dB is accepted as the smallest difference in level that is easily heard by most listeners listening to speech or music. It is a slight increase or decrease in volume<ref> [https://www.e2s.com/references-and-guidelines/db-decibel-ratings db Decibel Ratings]</ref>.
@@ Line 48: / Line 51: @@
 *A-weighted and C-weighted (dBA and dBC)
+;Notes
+:This 3 dB difference was measurable in a free field (no walls). When there are walls, the difference is less apparent due to room reflections.
+:A change of 3 dB is accepted as the smallest difference in level that is easily heard by most listeners listening to speech or music. It is a slight increase or decrease in volume<ref> [https://www.e2s.com/references-and-guidelines/db-decibel-ratings db Decibel Ratings]</ref>.
 ==Further reading==