Template:L1 Compact with Sub1 or Sub2: Difference between revisions

(One intermediate revision by the same user not shown)

Line 3:

For best results, the signal flow should go from

<table>

<th>First L1 Compact</th><th>Second L1 Compact (if you have two)</th></tr>

# [[File:Sub1 Sub2 io panel to L1 Compact.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to

# The Sub1 or Sub2 subwoofer LINE IN 1

# The Sub1 or Sub2 subwoofer LINE OUT 1 to

# [[File:Compact_Channel_2_Line_Level.png|thumb|Compact Channel 2]]The {{Compact}}

#* Connect to Channel 2

#* Connect to L1 Compact Channel 2

#* Set the ToneMatch switch to Line Level (down position)

#* Channel volume set to 12 o'clock.

#* Channel volume set to 12 o'clock.

</td>

<td>

# The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to

# The Sub1 or Sub2 subwoofer LINE IN 2

# The Sub1 or Sub2 subwoofer LINE OUT 2 to

# The second {{Compact}}

#* Connect to second L1 Compact Channel 2

#* Set the ToneMatch switch to Line Level (down position)

#* Channel volume set to 12 o'clock.

</td>

</tr>

</table>

;Note these settings on the Sub1 or Sub2

:👉 Set LINE IN EQ to '''L1'''

:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)

Set up this way,

@@ Line 3: / Line 3: @@
 For best results, the signal flow should go from
+<table>
+<th>First L1 Compact</th><th>Second L1 Compact (if you have two)</th></tr>
+<tr><td>
 # [[File:Sub1 Sub2 io panel to L1 Compact.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to
 # The Sub1 or Sub2 subwoofer LINE IN 1
 # The Sub1 or Sub2 subwoofer LINE OUT 1 to
 # [[File:Compact_Channel_2_Line_Level.png|thumb|Compact Channel 2]]The {{Compact}}
-#* Connect to Channel 2
+#* Connect to L1 Compact Channel 2
 #* Set the ToneMatch switch to Line Level (down position)
-#* Channel volume set to 12 o'clock.
+#* Channel volume set to 12&nbsp;o'clock.
+</td>
+<td>
+# The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to
+# The Sub1 or Sub2 subwoofer LINE IN 2
+# The Sub1 or Sub2 subwoofer LINE OUT 2 to
+# The second {{Compact}}
+#* Connect to second L1 Compact Channel 2
+#* Set the ToneMatch switch to Line Level (down position)
+#* Channel volume set to 12&nbsp;o'clock.
+</td>
+</tr>
+</table>
+;Note these settings on the Sub1 or Sub2
+:👉 Set LINE IN EQ to '''L1'''
+:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)
 Set up this way,