Bose Portable PA Knowledge

T4S ToneMatch Mixer Monitor Outputs: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
mNo edit summary
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{T4S icon}}{{Model II icon}}
{{T4S icon}}{{Model II icon}} {{L1 Pro icon}}
<table><tr>
<table><tr>
<td valign="top" width="250">__TOC__</td>
<td valign="top" width="250">__TOC__</td>
<td valign="top">
<td valign="top">
;How do I set up a powered monitor with my {{T4S}} and {{Model II}} or {{Model 1S}}
;How do I set up a powered monitor with my {{T4S}} and an L1 with at ToneMatch Port? ({{Model II}} or {{Model 1S}} or {{L1 Pro System}})?
[[File:T4S Monitor Outputs.png|500px]]
* If you are using an L1 Pro, L1 Compact, or S1 Pro see  [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]
 
[[File:T4S Monitor Outputs Summary.png|400px]]


You have several options for creating a monitor mix.
You have several options for creating a monitor mix.
# The same sound as you are sending to the L1 system
# [[{{PAGENAME}}#Main Right Output|The same sound as you are sending to the L1 system]]
#* If you have connected the L1 to ToneMatch Port <br> connect your monitor to the Main Right Output<br>[[File:T4S Monitor Outputs Main Out.png|400px]]
# [[{{PAGENAME}}#Main Left Output|Use the channel PAN controls to set up a monitor mix]]
# Use the channel pan controls to set up a monitor mix. <br>[[File:T4S Monitor Outputs Left Out.png|400px]]
# [[{{PAGENAME}}#Aux Output|Use the channel AUX settings to set up a monitor mix]]  
#* Panned center will give you the same sound as you are sending to the L1
#* Panned Hard Left will give you all of the sound in the monitor mix and not the L1
#* Panned Slightly Left will give more of the sound in the monitor mix and than the L1
# Use the [[T4S Pan Aux|channel Aux settings]] to set up a monitor mix. <br>[[File:T4S Monitor Outputs Aux Out.png|400px]]




Line 35: Line 33:


{{T4S Pan Aux}}  
{{T4S Pan Aux}}  
=== Headphone Output ===
[[File:T4S Phones.jpg|300px]]
You can use the T4S Headphone output as a source for a or remote powered loudspeaker (e.g. S1 Pro, L1 Compact, L1 Model II, L1 Pro).
;NOTE If you connect a 1/4 inch (6.3mm) Tip-Sleeve  jack to the Headphone output, you will get only the Left channel. Anything panned hard Right will not be heard through this connection. This applies to wireless systems that use a 1/4 inch (6.3mm) Tip-Sleeve jack.
Since the T4S ToneMatch Port (with power) outputs only the Right channel, this may or may not be useful to you.
See also: 
* [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]
* [[T4S/T8S Headphone Output to L1 Pro]]




Retrieved from "https://boseperformer.com/T4S_ToneMatch_Mixer_Monitor_Outputs"