Mixer to Share Presets on the Compact: Difference between revisions

(3 intermediate revisions by the same user not shown)

Line 4:

This article is about using a Mixer to allow more than one input per Compact channel to use [[ToneMatch®|ToneMatch® Presets]].

[[Image:MixerToSharePresetsCompact.jpg|right]]

~~Using a Mixer to allow more than one input per Compact channel to use presets.~~

</td>

</tr></table> </noinclude>

Line 28:

Line 30:

=== Example ===

==== 2 Vocals, 2 Guitars ====

You have two vocal microphones. Route these through the mixer to Compact Channel 1

* You have two vocal microphones. Route these through the mixer to Compact Channel 1

You have two similar Acoustic Guitars with pickups. Route these through the mixer to Compact Channel 2 with ToneMatch switch on (UP).

* You have two similar Acoustic Guitars with pickups. Route these through the mixer to Compact Channel 2 with ToneMatch switch on (UP).

[[Image:MixerToSharePresetsCompact.jpg]]

Line 43:

Line 45:

# Run the Mixer RIGHT output to the Power Stand Channel 2

# Set the Compact Channel 2 ToneMatch Switch ON (up position)

==== 2 Vocals, 2 Instruments ====

====== Microphones ======

# Run both microphones to the mixer.

# On the input strips for the microphones pan all the way to the LEFT

# Run the Mixer LEFT output to the Compact Channel 1

[[Image:MixerToSharePresetsCompact02.jpg]]

====== Instruments ======

# Run both Instruments to the mixer. I used a Keyboard and an Electric Bass as examples

# On the input strips for the Instruments pan all the way to the RIGHT

# Run the Mixer RIGHT output to the Power Stand Channel 2

# Set the Compact Channel 2 ToneMatch Switch to Line Level (down position)

----

@@ Line 4: / Line 4: @@
 <td valign="top" width="250">__TOC__</td>
 <td valign="top">
+{{ToneMatch icon}}
+This article is about using a Mixer to allow more than one input per Compact channel to use [[ToneMatch®|ToneMatch® Presets]].
 [[Image:MixerToSharePresetsCompact.jpg|right]]
-Using a Mixer to allow more than one input per Compact channel to use presets.
 </td>
 </tr></table> </noinclude>
@@ Line 28: / Line 30: @@
 === Example ===
 ==== 2 Vocals, 2 Guitars ====
-You have two vocal microphones.  Route these through the mixer to Compact Channel 1
+* You have two vocal microphones.  Route these through the mixer to Compact Channel 1
-You have two similar Acoustic Guitars with pickups.  Route these through the mixer to Compact Channel 2 with ToneMatch switch on (UP).
+* You have two similar Acoustic Guitars with pickups.  Route these through the mixer to Compact Channel 2 with ToneMatch switch on (UP).
 [[Image:MixerToSharePresetsCompact.jpg]]
@@ Line 43: / Line 45: @@
 # Run the Mixer RIGHT output to the Power Stand Channel 2
 # Set the Compact Channel 2 ToneMatch Switch ON (up position)
+==== 2 Vocals, 2 Instruments ====
+====== Microphones ======
+# Run both microphones to the mixer.
+# On the input strips for the microphones pan all the way to the LEFT
+# Run the Mixer LEFT output to the Compact Channel 1
+[[Image:MixerToSharePresetsCompact02.jpg]]
+====== Instruments ======
+# Run both Instruments to the mixer.  I used a Keyboard and an Electric Bass as examples
+# On the input strips for the Instruments pan all the way to the RIGHT
+# Run the Mixer RIGHT output to the Power Stand Channel 2
+# Set the Compact Channel 2 ToneMatch Switch to Line Level (down position)
 ----