R1 Remote: Difference between revisions - Bose Portable PA Knowledge

(3 intermediate revisions by the same user not shown)

Line 79:

Here's an idea for a bracket you can mount on the mic stand. Sure, the velcro is fine but ...

[http://www.musiciansfriend.com/~~srs7/g=home/search/detail/base_pid/452072~~/ Musicians Friend link to bracket]

[http://www.musiciansfriend.com/pro-audio/on-stage-stands-my550-mic-extension-attachment-bar Musicians Friend link to bracket]

See: [http://bose.infopop.cc/eve/ubb.x/a/tpc/f/3976055944/m/7191095141/r/7191095141 Bracket for the Remote]

== Zipper Sounds, Latency ==

Line 105:

Line 104:

From Hilmar-at-Bose <ref>Hilmar-at-Bose talks about [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7346041205?r=4521050871#4521050871 LEDs and the Insert Loop]</ref>

~~Mr. Jonz is right (as always).~~ The LED on the remote is after the insert loop. Depending on how much energy the signal gains (or looses) in the loop, the LEDs on the power stand and on the remote get out of sync.

The LED on the remote is after the insert loop. Depending on how much energy the signal gains (or looses) in the loop, the LEDs on the power stand and on the remote get out of sync.

Unfortunately, there isn't any easy way to set an effects processor to "unity gain". Observing the two LEDs might help with that.

Line 151:

Line 150:

If the knobs get stiff, you can pull them out a bit. Chances are they've just gotten jammed down during packing.

== Replacement Cable ==

You can get a replacement cable (sometimes known as a 7 pin midi cable).

[[File:Hosa 7pin phantom midi.png|link=https://www.google.com/search?q=7+pin+midi|400px|Hosa 7 pin phantom midi cable]]

[http://www.musiciansfriend.com/accessories/hosa-7-pin-phantom-midi-cable Hosa 7 pin phantom midi cable at Musicians Friend]

----

@@ Line 79: / Line 79: @@
 Here's an idea for a bracket you can mount on the mic stand. Sure, the velcro is fine but ...
-[http://www.musiciansfriend.com/srs7/g=home/search/detail/base_pid/452072/ Musicians Friend link to bracket]
+[http://www.musiciansfriend.com/pro-audio/on-stage-stands-my550-mic-extension-attachment-bar Musicians Friend link to bracket]
 See: [http://bose.infopop.cc/eve/ubb.x/a/tpc/f/3976055944/m/7191095141/r/7191095141 Bracket for the Remote]
 == Zipper Sounds, Latency ==
@@ Line 105: / Line 104: @@
 From Hilmar-at-Bose <ref>Hilmar-at-Bose talks about [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/7346041205?r=4521050871#4521050871 LEDs and the Insert Loop]</ref>
-Mr. Jonz is right (as always). The LED on the remote is after the insert loop. Depending on how much energy the signal gains (or looses) in the loop, the LEDs on the power stand and on the remote get out of sync.
+The LED on the remote is after the insert loop. Depending on how much energy the signal gains (or looses) in the loop, the LEDs on the power stand and on the remote get out of sync.
 Unfortunately, there isn't any easy way to set an effects processor to "unity gain". Observing the two LEDs might help with that.
@@ Line 151: / Line 150: @@
 If the knobs get stiff, you can pull them out a bit. Chances are they've just gotten jammed down during packing.
+== Replacement Cable ==
+You can get a replacement cable (sometimes known as a 7 pin midi cable).
+[[File:Hosa 7pin phantom midi.png|link=https://www.google.com/search?q=7+pin+midi|400px|Hosa 7 pin phantom midi cable]]
+[http://www.musiciansfriend.com/accessories/hosa-7-pin-phantom-midi-cable Hosa 7 pin phantom midi cable at Musicians Friend]
 ----