L1® Classic: Difference between revisions

← Older edit

VisualWikitext

@@ Line 2: / Line 2: @@
 <table><tr>
-<td valign="top" width="250">__TOC__</td>
+<td valign="top" width="450">__TOC__</td>
 <td valign="top">
 [[Image:L1DoubleBass.gif]]
+== Documentation ==
+[[Media:BoseManualClassic20050209.pdf|L1® Classic Owners Guide]]
+<!-- backup source
+[http://bose.infopop.cc/eve/forums/a/ga/ul/9801059844/boseManualClassic20050209.pdf L1® Classic Owners Guide]
+-->
 </td>
 </tr></table>
-{{:Different Models}}
+{{Different Models}}
 == Introduction ==
@@ Line 17: / Line 25: @@
 Visually and acoustically the L1 Classic is almost identical to the Model I, with only a few notable differences.
+The serial number for any Classic tower should start with '''032495''' <ref>The serial number for any Classic tower should start with 032495. [http://bose.infopop.cc/eve/forums/a/tpc/f/76010377/m/1290005466?r=7720055466#7720055466 Nick-at-Bose]</ref>.
 ==Comparison of the Classic to the Model I==
 ===Acoustical Output===
-{{:L1® Classic and Model I Acoustical Output}}(Furthermore, the Model II system plays as loud as the Classic or the Model I.)
-===PS1 Power Stand Connections===
-{{Classic}} '''shipped between 2003 and 2005'''
-The L1 Classic had features built into its input/output panel that allowed the three amplifiers to be used separately as power amplifiers. For example, up to six {{B1}}s could be driven from an auxiliary Power Stand. See: [[Classic Extended Bass Package]]
-The input/output panel as it appeared in units shipped between 2003 and 2005 is shown.
-(Units that look like this were shipped with [[Presets 1.0]] installed. An upgrade to [[Presets 2 Upgrade instructions|Presets Version 2.0]] is available and highly recommended.)
-[[Image:ClassicIOPanel1.png]]
-*  On the right side of the input/output panel, there are inputs for
+{{L1® Classic, Model I, and Model II Acoustical Output}}
-** All Amps In
-** Amp 1 In
-** Amp 2 In
-** Amp 3 In
-* And outputs for
+=== Power Stand Connections ===
-** Amp 1 Out
+{{L1® Classic, Model I Power Stand Connections}}
-** Amp 2 Out
-** Amp 3 Out (used for {{B1}}s)
+=== {{Model I}} Orange Markings ===
-{{Classic}} '''shipped between 2006 and 2007'''
+{{L1® Model I Orange L1® Markings}}
-Units that shipped between 2005 and 2007 (when the {{Classic}} was replaced by the {{Model I}}) were shipped with the Version 2 [[Presets/Model I and Classic|Presets]]. The input/output panel of these later units have a blue ring around the Amp 3 output (for {{B1}}s).
-[[Image:ClassicIOPanel2.png]]
-'''Model I'''
-The {{Model I}} uses a simpler input/output panel
-*  Dropped Amp 1 out, Amp 2 output found on the {{Classic}}
-*  Identified by orange labels and {{L1 no link}} logo
-*  [http://en.wikipedia.org/wiki/RoHS RoHS]   compliant.
-*  Shipped with [[Presets 3.0]] installed.
-[[Image:ModelI-whole-I-O-panel.png|800px]]
-More detail: [[PS1 Powerstand Connections|PS1 Power Stand Connections]]
 ==Downloads for the L1 Classic==
@@ Line 75: / Line 43: @@
 * [[Presets 2 Upgrade instructions|Version 2.0 Presets and Firmware Updates]] (bundled into one download)
+== Lower Section Only ==
+{{#lst:L1 Cylindrical Radiator® loudspeaker|Lower Half Only}}
 == Holistic View ==