Mixer / Numark / CDMix-2: Difference between revisions

(5 intermediate revisions by the same user not shown)

Line 1:

__NOEDITSECTION__

<big>'''Numark CDMix-2 Mixer'''</big>

== Summary ==

Simplest thing that could possibly work.

'''Use the XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel

'''Use the Numark XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel

-= or =-

Use a converter

Use the Numark RCA phono jack outputs (documented on page 2 of the manual as "to Powered Monitors").

Use a converter (<html><a href=http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt-QMFRCM&preadd=action">RCA Male to ¼ inch phone jack female</a></html>)

[[Image:RCAMaleTo14InchFemale.png]]

Line 17:

Line 19:

[[Image:TsMtsM.png|Tip-Sleeve to Tip-Sleeve]]

Or an RCA phone to ¼ phone jack cable ~~to use the RCA phone jack outputs (documented on page 2 of the manual as "to Powered Monitors")~~. You can connect a ¼ inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.

Or an RCA phone to ¼ phone jack cable. You can connect a ¼ inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.

'''

Line 26:

Line 28:

== Outputs ==

=== XLR Balanced +14 ===

=== XLR Balanced +14 dBV ===

If you want to use the XLR ~~output~~, you will likely need to use a [[Pad]] for each channel.

If you want to use the XLR outputs, you will likely need to use a [[Pad]] for each channel.

=== RCA to ¼ Inch ===

The RCA outputs provide a signal at a level that is suitable for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4.

The RCA outputs provide a signal at a level that is suitable (+14 dBV) for the ¼ inch phone jack inputs on Power Stand channels 1,2 3 or 4.

To use these you will need an adapter or special cable to convert from RCA to ¼ inch phone jacks.

@@ Line 1: / Line 1: @@
 __NOEDITSECTION__
 <big>'''Numark CDMix-2 Mixer'''</big>
+{{Classic icon}}{{Model I icon}}
 == Summary ==
 Simplest thing that could possibly work.
-'''Use the XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel
+'''Use the Numark XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel
 -= or =-
-Use a converter
+Use the  Numark RCA phono jack outputs (documented on page 2 of the manual as "to Powered Monitors").
+Use a converter (<html><a href=http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt-QMFRCM&preadd=action">RCA Male to &frac14; inch phone jack female</a></html>)
 [[Image:RCAMaleTo14InchFemale.png]]
@@ Line 17: / Line 19: @@
 [[Image:TsMtsM.png|Tip-Sleeve to Tip-Sleeve]]
-Or  an RCA phone to &frac14; phone jack cable to use the RCA phone jack outputs (documented on page 2 of the manual as "to Powered Monitors"). You can connect a &frac14; inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.
+Or  an RCA phone to &frac14; phone jack cable. You can connect a &frac14; inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.
 '''
@@ Line 26: / Line 28: @@
 == Outputs ==
-=== XLR Balanced +14 ===
+=== XLR Balanced +14 dBV ===
 {{TooHotForPS1}}
-If you want to use the XLR output, you will likely need to use a [[Pad]] for each channel.
+If you want to use the XLR outputs, you will likely need to use a [[Pad]] for each channel.
 === RCA to &frac14; Inch ===
-The RCA outputs provide a signal at a level that is suitable for the &frac14; inch phone jack inputs on Power Stand channels 1,2 3 or 4.
+The RCA outputs provide a signal at a level that is suitable (+14 dBV) for the &frac14; inch phone jack inputs on Power Stand channels 1,2 3 or 4.
 To use these you will need an adapter or special cable to convert from RCA to &frac14; inch phone jacks.