Mixer / Numark / CDMix-2: Difference between revisions

← Older edit

VisualWikitext

@@ Line 1: / Line 1: @@
-<!-- Use this an an outline for a mixer page -->
+__NOEDITSECTION__
-<!-- Please link to external images, do not upload them to the server -->
+<big>'''Numark CDMix-2 Mixer'''</big>
-<!-- Naming convention
+{{Classic icon}}{{Model I icon}}
-Mixer/Make/Model
-e.g.
-Mixer/Mackie/DFX12
- -->
-<big>'''Make/Model here Mixer'''</big>
 == Summary ==
 Simplest thing that could possibly work.
-'''Use the ¼ inch phone jack outputs (documented as 'to powered monitors') not the XLR-to-XLR (PS1 Powerstand Channels 1 or 2). If you want to use XLR - use a [[Pad]].
+'''Use the Numark XLR Main Outputs to Power Stand Channels 1 and 2. Use a [[Pad]] for each channel
+-= or =-
+Use the  Numark RCA phono jack outputs (documented on page 2 of the manual as "to Powered Monitors").
+Use a converter (<html><a href=http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt-QMFRCM&preadd=action">RCA Male to &frac14; inch phone jack female</a></html>)
+[[Image:RCAMaleTo14InchFemale.png]]
+plus a &frac14; inch to &frac14; inch phone jack cable for each channel
+[[Image:TsMtsM.png|Tip-Sleeve to Tip-Sleeve]]
+Or  an RCA phone to &frac14; phone jack cable. You can connect a &frac14; inch phone jack to any of the Power Stand Channels 1, 2, 3 or 4.
 '''
+[[Image:RCAtoPhoneHosaCPR420.png]]
+See: http://www.hosatech.com/hosa/products/CPR-400.html
 == Outputs ==
-<!-- delete anything that is not applicable -->
-=== XLR Balanced +4 ===
+=== XLR Balanced +14 dBV ===
 {{TooHotForPS1}}
+If you want to use the XLR outputs, you will likely need to use a [[Pad]] for each channel.
+=== RCA to &frac14; Inch ===
+The RCA outputs provide a signal at a level that is suitable (+14 dBV) for the &frac14; inch phone jack inputs on Power Stand channels 1,2 3 or 4.
+To use these you will need an adapter or special cable to convert from RCA to &frac14; inch phone jacks.
+=== Which Power Stand Inputs ===
+If you use XLR cables you may use these with Power Stand Channels 1 or 2.
+-= or =-
+If you use the '''¼ inch phone jack''' (Tip-Sleeve) inputs to
+*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls  <br /> OR <br />
+*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
-=== &frac14; Inch with suitable output===
-Use the outputs marked "to powered monitors" for PS1 Powerstand Channel 1 or 2 inputs
-{{RunTROrTRSUnbalanced}}
-Links:
+== Links ==
 * [http://bose.infopop.cc/eve/forums/a/ga/ul/4371069053/NumarkCDMIX2.pdf Manual]
 * http://bose.infopop.cc/eve/forums/a/ga/ul/9531079053/inlineimg/Y/NumarkCDMix2Out1a.gif
@@ Line 41: / Line 69: @@
 [[category:Mixer]]
+[[category:Numark]]