Mixer / Behringer / UB1222FX-Pro: Difference between revisions

(7 intermediate revisions by the same user not shown)

Line 1:

~~~~

~~~~

~~<!-- Naming convention~~

~~Mixer/Make/~~Model

~~e.g.~~

~~Mixer/Mackie/DFX12~~

~~-->~~

<big>''' Behringer UBX 1222FX Mixer'''</big>

== Summary ==

Simplest thing that could possibly work.

http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif

~~Use the mixer '''Mon Out ¼ inch phone jack''' (Tip-Sleeve) outputs to~~

* The {{PS1}} Channels 1 or 2 if you want to use the [[Presets]] and the [[R1 Remote]] Tone and Level Controls <br /> OR <br />

* The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].

''' {{UseXLR}} '''

== Outputs ==

Line 23:

Line 18:

=== ~~¼~~ Inch with ~~suitable output~~===

You may need to use a 20 dB [[pad]] to match the output level from the mixer to the input level on the PS1 Powerstand: Channel 1 or PS1 Powerstand: Channel 2.

~~Mixer '''Mon Out'''~~ to the PS1 ~~Powerstand Channel~~ 1 or 2 inputs

----

=== Cables you can use ===

==== XLR (balanced) to XLR (balanced) ====

[[Image:XLRXLRMF.png|thumb|XLR to XLR, male to female|right]]

(balanced to balanced) should be fine. This is the same kind of cable you would use to connect a microphone.

[[Image:Pad.jpg]]

=== XLR Balanced Output to ¼ inch Phone Jack ===

==== XLR Female to ¼ Inch Tip-Sleeve ====

[[Image:xlrFtxM.png|XLR Female to 1/4 Inch Tip Sleeve]]

This should work well with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced. There is no particular benefit to using this kind of cable as compared to the one below.

==== XLR (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced) ====

[[Image:xlrFtrsM.png|XLR female to Tip-Ring-Sleeve]]

This should work well with any of the ¼ Inch inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced, so there is no particular advantage to using this balanced cable compared to an unbalanced cable. There is no particular benefit to using this kind of cable as compared to the one above.

==== If you use the ¼ inch inputs ====

Use

* The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls <br /> OR <br />

* The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].

~~{{RunTROrTRSUnbalanced}}~~

Links:

* [http://bose.infopop.cc/eve/forums/a/ga/ul/9981076553/UB1222FX-PRO_ENG_Rev_B.pdf Manual]

* [http://www.behringerdownload.de/UB1222FX-PRO/UB1222FX-PRO_VIEW_Rev_B.pdf Block Diagram]

* http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif

<!--

* http://bose.infopop.cc/eve/forums/a/ga/ul/5751026663/inlineimg/Y/BehringerUB1222FX-PROMonOut.gif

-->

@@ Line 1: / Line 1: @@
-<!-- Use this an an outline for a mixer page -->
+{{Classic icon}}{{Model I icon}}
-<!-- Please link to external images, do not upload them to the server -->
-<!-- Naming convention
-Mixer/Make/Model
-e.g.
-Mixer/Mackie/DFX12
- -->
 <big>''' Behringer UBX 1222FX Mixer'''</big>
 == Summary ==
 Simplest thing that could possibly work.
+http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif
-Use the mixer '''Mon Out ¼ inch phone jack''' (Tip-Sleeve) outputs to
-*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets]] and the [[R1 Remote]] Tone and Level Controls  <br /> OR <br />
-*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
+''' {{UseXLR}} '''
 == Outputs ==
@@ Line 23: / Line 18: @@
-=== &frac14; Inch with suitable output===
+You may need to use a 20 dB [[pad]] to match the output level from the mixer to the input level on the PS1 Powerstand: Channel 1  or PS1 Powerstand: Channel 2.
-Mixer '''Mon Out''' to the  PS1 Powerstand Channel 1 or 2 inputs
+----
+=== Cables you can use ===
+==== XLR (balanced) to XLR (balanced)  ====
+[[Image:XLRXLRMF.png|thumb|XLR to XLR, male to female|right]]
+(balanced to balanced) should be fine. This is the same kind of cable you would use to connect a microphone.
+[[Image:Pad.jpg]]
+=== XLR Balanced Output to ¼ inch Phone Jack ===
+====  XLR Female  to ¼ Inch  Tip-Sleeve  ====
+[[Image:xlrFtxM.png|XLR Female to 1/4 Inch Tip Sleeve]]
+This should work well with any of the  ¼ Inch  inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced. There is no particular benefit to using this kind of cable as compared to the one below.
+====  XLR (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  ====
+[[Image:xlrFtrsM.png|XLR female to Tip-Ring-Sleeve]]
+This should work well  with any of the  ¼ Inch  inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced, so there is no particular advantage  to using this balanced cable compared to an unbalanced cable. There is no particular benefit to using this kind of cable as compared to the one above.
+==== If you use the ¼ inch inputs ====
+Use
+*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls  <br /> OR <br />
+*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
-{{RunTROrTRSUnbalanced}}
 Links:
 * [http://bose.infopop.cc/eve/forums/a/ga/ul/9981076553/UB1222FX-PRO_ENG_Rev_B.pdf Manual]
+* [http://www.behringerdownload.de/UB1222FX-PRO/UB1222FX-PRO_VIEW_Rev_B.pdf Block Diagram]
 * http://bose.infopop.cc/eve/forums/a/ga/ul/8501086553/inlineimg/Y/BehringerUBX1222FX.gif
+<!--
 * http://bose.infopop.cc/eve/forums/a/ga/ul/5751026663/inlineimg/Y/BehringerUB1222FX-PROMonOut.gif
+-->