Mixer Outline Template: Difference between revisions

VisualWikitext

@@ Line 1: / Line 1: @@
 <!-- Use this an an outline for a mixer page -->
 <!-- Please link to external images, do not upload them to the server -->
-<big>''' :Mixer'''</big>
+<!-- Naming convention
+Mixer/Make/Model
+e.g.
+Mixer/Mackie/DFX12
+ -->
+{{Classic icon}}{{Model I icon}}
+<big>''' Make/Model here Mixer '''</big>
+== Summary ==
+Simplest thing that could possibly work.
+''' {{Use1/4}} '''
+''' {{UseXLR}} '''
 == Outputs ==
-XLR Balanced +4
+<!-- delete anything that is not applicable -->
+=== XLR Balanced +4 ===
 {{TooHotForPS1}}
-XLR Balanced with built-in-pad
+=== XLR Balanced with built-in-pad ===
 {{UsePadSetting}}
-&frac1/4 Inch with suitable output for PS1 Powerstand Channel 1 or 2 inputs
+=== &frac14; Inch with suitable output===
+for PS1 Powerstand Channel 1 or 2 inputs
 {{RunTROrTRSUnbalanced}}
+<!-- Remove anything you don't need from the following cables -->
+=== Cables you can use ===
+==== XLR (balanced) to XLR (balanced)  ====
+[[Image:XLRXLRMF.png|thumb|XLR to XLR, male to female|right]]
+(balanced to balanced) should be fine. This is the same kind of cable you would use to connect a microphone.
+[[Image:Pad.jpg]]
+=== XLR Balanced Output to ¼ inch Phone Jack ===
+====  XLR Female  to ¼ Inch  Tip-Sleeve  ====
+[[Image:xlrFtxM.png|XLR Female to 1/4 Inch Tip Sleeve]]
+This should work well with any of the  ¼ Inch  inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced. There is no particular benefit to using this kind of cable as compared to the one below.
+====  XLR (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  ====
+[[Image:xlrFtrsM.png|XLR female to Tip-Ring-Sleeve]]
+This should work well  with any of the  ¼ Inch  inputs for Power Stand Channels 1, 2, 3, 4. Those inputs are all unbalanced, so there is no particular advantage  to using this balanced cable compared to an unbalanced cable. There is no particular benefit to using this kind of cable as compared to the one above.
+==== If you use the ¼ inch inputs ====
+Use
+*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls  <br /> OR <br />
+*  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
 Links:
 * [ Manual]
-* Image of connections
+* link to an image from the manual
-* Image of connections
+* link to an image from the manual
 More Notes