S1 Pro to L1 Pro: Difference between revisions

VisualWikitext

@@ Line 1: / Line 1: @@
-[[File:S1 Pro Line Out.jpg|400px|right|S1 Pro system Line Out]]
+{{L1 Pro icon}}{{S1 Pro icon}}
-<BIG>Draft</BIG>
+[[File:S1 Pro to L1 Pro.jpg|400px|right|S1 Pro Line Out to L1 Pro]]
-==== Connection to L1 Pro ====
+==== Overview ====
-Connect the Line Out from an {{S1}} to L1 Pro Channel 3.
+You can use your S1 Pro as your monitor and connect the S1 Pro Line out to an L1 Pro (any model) to amplify your sound and share it with the venue.
+==== S1 Pro Line Out to L1 Pro Channel 3====
+Connect the Line Out from an {{S1}} to L1 Pro Channel 3. Using Channel&nbsp;3 is the simplest and provides the best match for the signal level from the S1 Pro Line Out. This also leaves L1 Pro Channels 1 and 2 for other inputs.
+==== Cable {{14TRS}}====
 Use a {{14TRS}} for best results.
 A {{14TS}} cable can work, but will be more susceptible to line noise.
+====Setting Up====
+With the volumes on both S1 Pro and L1 Pro turned down and units powered off:
+# Connect the cable from the S1 Pro to the L1 Pro
+# Connect your microphone and instrument to the S1 Pro
+# Adjust the settings on the S1 Pro for your best sound
+# Bring up the volumes on the S1 Pro to the desired levels.
+# With the volumes on the L1 Pro turned down, turn on the L1 Pro
+# Bring up the volume on the L1 Pr channel to which you connected the S1 Pro. Bring the volume up to the desired level. If the signal indicator goes solid red, turn down the volume.
+====Recommendations====
+On the L1 Pro
+Mute any unused channels
+If you use L1 Pro Channel 3
+* Set Treble and Bass settings at 12:00 o'clock
+If you use L1 Pro Channels 1 or 2
+* Set the ToneMatch switch to Off
+* Set Treble and Bass settings at 12:00 o'clock
+* Set Reverb off
@@ Line 14: / Line 40: @@
 [[Category:S1 Pro]]
 [[Category:Connections]]
-[[Category:Draft]]