Sub1/Sub2: Difference between revisions - Bose Portable PA Knowledge

(9 intermediate revisions by the same user not shown)

Line 121:

=== SubMatch Cable===

=== Crossover Frequencies ===

[[File:Sub1_Sub2_io_panel.jpg|thumb|Sub io panel]]

* LINE IN EQ set to L1: 200 Hz <br>Use with any full size L1 System)

** This is selected automatically when using the SubMatch cable connection with an L1 Pro32

* S1 Pro: 150 Hz

** Press and hold LINE OUT EQ button for 4 seconds. The HPF LED will illuminate green. To deactivate the S1 Pro EQ, press and hold for

four seconds

*LINE IN EQ set to LPF: 100 Hz<br>Use this with third-party full-range and mid-high speaker systems

=== SubMatch Connection Signal Flow ===

[[File:Sub1 Sub2 io panel.jpg|thumb]]

Line 139:

Line 151:

* Line Out 2 LINE OUT EQ is FULL RANGE or HPF depending on the setting of the Line Out EQ button

=== ~~Sub2~~ with Sub1 ===

~~{{Template:Sub2~~ with Sub1}}

=== S1 Pro+ with Sub1 or Sub2 ===

See [[S1 Pro+ with Sub1 or Sub2]]

=== {{S1 Pro}} with Sub1/Sub2 ===

~~{{Sub~~ with ~~S1Pro}}~~

See [[S1 Pro with Sub1 or Sub2]]

=== {{Compact}} with Sub1/Sub2 ===

~~Please see~~ [[L1 Compact with Sub1 or Sub2]]

See [[L1 Compact with Sub1 or Sub2]]

=== Sub2 with Sub1 ===

~~=== L1 Model II with Sub1/Sub2 ===~~

~~====If you have a T1 ToneMatch mixer====~~

~~[[File:T1 Master Output to Sub1Sub2.jpg|300px|right]]~~

~~#Connect the T1 Main Output to the Sub1/Sub2~~

~~#* 1/4 inch Tip Ring Sleeve to Sub1/Sub2 Input 1.~~

~~#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other.~~

~~#On the Sub1/Sub2 set the LPF setting to L1.~~

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have one or two B1s connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out#Cable_connected_to_the_Bass_Line_Out_3|L1 Model II with cable connected to Bass Line Out]]</ref>

~~#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply)~~

~~====If you have a third-party mixer====~~

~~#Connect a sub or aux line out to Sub1/Sub2 Input 1.~~

~~#On the Sub1/Sub2 set the LPF setting to~~ L1.

~~#DON'T connect~~ Sub1/Sub2 ~~to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.~~

=== Cooling ===

@@ Line 121: / Line 121: @@
 <div></div>
+=== SubMatch Cable===
+{{SubMatch Cable}}
+=== Crossover Frequencies ===
+[[File:Sub1_Sub2_io_panel.jpg|thumb|Sub io panel]]
+* LINE IN EQ set to L1: 200 Hz <br>Use with any full size L1 System)
+** This is selected automatically when using the SubMatch cable connection with an L1 Pro32
+* S1 Pro: 150 Hz
+**  Press and hold LINE OUT EQ button for 4 seconds. The HPF LED will illuminate green. To deactivate the S1 Pro EQ, press and hold for
+four seconds
+*LINE IN EQ set to LPF: 100 Hz<br>Use this with third-party full-range and mid-high speaker systems
 === SubMatch Connection Signal Flow ===
 [[File:Sub1 Sub2 io panel.jpg|thumb]]
@@ Line 139: / Line 151: @@
 * Line Out 2 LINE OUT EQ is FULL RANGE or HPF depending on the setting of the Line Out EQ button
-=== Sub2 with Sub1 ===
-{{Template:Sub2 with Sub1}}
+=== S1 Pro+ with Sub1 or Sub2 ===
+See [[S1 Pro+ with Sub1 or Sub2]]
 === {{S1 Pro}} with Sub1/Sub2 ===
-{{Sub with S1Pro}}
+See [[S1 Pro with Sub1 or Sub2]]
 === {{Compact}} with Sub1/Sub2 ===
-Please see [[L1 Compact with Sub1 or Sub2]]
+See [[L1 Compact with Sub1 or Sub2]]
+=== Sub2 with Sub1 ===
+{{Template:Sub2 with Sub1}}
-=== L1 Model II with Sub1/Sub2 ===
-====If you have a T1 ToneMatch mixer====
-[[File:T1 Master Output to Sub1Sub2.jpg|300px|right]]
-#Connect the T1 Main Output to the Sub1/Sub2
-#* 1/4 inch Tip Ring Sleeve to Sub1/Sub2 Input 1.
-#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other.
-#On the Sub1/Sub2 set the LPF setting to L1.
-#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have one or two B1s connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out#Cable_connected_to_the_Bass_Line_Out_3|L1 Model II with cable connected to Bass Line Out]]</ref>
-#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply)
-====If you have a third-party mixer====
+{{L1 Model II with Sub1/Sub2}}
-#Connect a sub or aux line out to Sub1/Sub2 Input 1.
-#On the Sub1/Sub2 set the LPF setting to L1.
-#DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
 === Cooling ===