Sub1/Sub2: Difference between revisions - Bose Portable PA Knowledge

(11 intermediate revisions by the same user not shown)

Line 121:

=== SubMatch Cable===

=== Crossover Frequencies ===

[[File:Sub1_Sub2_io_panel.jpg|thumb|Sub io panel]]

* LINE IN EQ set to L1: 200 Hz <br>Use with any full size L1 System)

** This is selected automatically when using the SubMatch cable connection with an L1 Pro32

* S1 Pro: 150 Hz

** Press and hold LINE OUT EQ button for 4 seconds. The HPF LED will illuminate green. To deactivate the S1 Pro EQ, press and hold for

four seconds

*LINE IN EQ set to LPF: 100 Hz<br>Use this with third-party full-range and mid-high speaker systems

=== SubMatch Connection Signal Flow ===

[[File:Sub1 Sub2 io panel.jpg|thumb]]

Line 139:

Line 151:

* Line Out 2 LINE OUT EQ is FULL RANGE or HPF depending on the setting of the Line Out EQ button

=== ~~Sub2~~ with Sub1 ===

~~{{Template:Sub2~~ with Sub1}}

=== S1 Pro+ with Sub1 or Sub2 ===

See [[S1 Pro+ with Sub1 or Sub2]]

=== {{S1 Pro}} with Sub1/Sub2 ===

~~{{Sub~~ with ~~S1Pro}}~~

See [[S1 Pro with Sub1 or Sub2]]

=== {{Compact}} with Sub1/Sub2 ===

~~Please see~~ [[L1 Compact with Sub1 or Sub2]]

See [[L1 Compact with Sub1 or Sub2]]

=== Sub2 with Sub1 ===

~~=== L1 Model II with Sub1/Sub2 ===~~

~~====If you have a T1 ToneMatch mixer====~~

~~[[File:T1 Master Output to Sub1Sub2.jpg|300px|right]]~~

~~#Connect the T1 Main Output to the Sub1/Sub2~~

~~#* 1/4 inch Tip Ring Sleeve to Sub1/Sub2 Input 1.~~

~~#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other.~~

~~#On the Sub1/Sub2 set the LPF setting to L1.~~

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have a B1 or B2 connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out#Bass_Line_Out_and_B1_behavior_2|L1 Model II Bass Line Out]]</ref>

~~#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply)~~

~~====If you have a third-party mixer====~~

~~#Connect a sub or aux line out to Sub1/Sub2 Input 1.~~

~~#On the Sub1/Sub2 set the LPF setting to~~ L1.

~~#DON'T connect~~ Sub1/Sub2 ~~to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.~~

=== Cooling ===

@@ Line 121: / Line 121: @@
 <div></div>
+=== SubMatch Cable===
+{{SubMatch Cable}}
+=== Crossover Frequencies ===
+[[File:Sub1_Sub2_io_panel.jpg|thumb|Sub io panel]]
+* LINE IN EQ set to L1: 200 Hz <br>Use with any full size L1 System)
+** This is selected automatically when using the SubMatch cable connection with an L1 Pro32
+* S1 Pro: 150 Hz
+**  Press and hold LINE OUT EQ button for 4 seconds. The HPF LED will illuminate green. To deactivate the S1 Pro EQ, press and hold for
+four seconds
+*LINE IN EQ set to LPF: 100 Hz<br>Use this with third-party full-range and mid-high speaker systems
 === SubMatch Connection Signal Flow ===
 [[File:Sub1 Sub2 io panel.jpg|thumb]]
@@ Line 139: / Line 151: @@
 * Line Out 2 LINE OUT EQ is FULL RANGE or HPF depending on the setting of the Line Out EQ button
-=== Sub2 with Sub1 ===
-{{Template:Sub2 with Sub1}}
+=== S1 Pro+ with Sub1 or Sub2 ===
+See [[S1 Pro+ with Sub1 or Sub2]]
 === {{S1 Pro}} with Sub1/Sub2 ===
-{{Sub with S1Pro}}
+See [[S1 Pro with Sub1 or Sub2]]
 === {{Compact}} with Sub1/Sub2 ===
-Please see [[L1 Compact with Sub1 or Sub2]]
+See [[L1 Compact with Sub1 or Sub2]]
+=== Sub2 with Sub1 ===
+{{Template:Sub2 with Sub1}}
-=== L1 Model II with Sub1/Sub2 ===
-====If you have a T1 ToneMatch mixer====
-[[File:T1 Master Output to Sub1Sub2.jpg|300px|right]]
-#Connect the T1 Main Output to the Sub1/Sub2
-#* 1/4 inch Tip Ring Sleeve to Sub1/Sub2 Input 1.
-#* If you prefer, you can use a 1/4 inch (6.3 mm) Tip-Ring-Sleeve to XLR (T1 to Sub1/Sub2 Input 1). <br>There's no particular benefit to choosing one cable over the other.
-#On the Sub1/Sub2 set the LPF setting to L1.
-#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1. Also, if you have a B1 or B2 connected to the Model II Power Stand and you connect something to the Bass Line Out, the system will reduce the overall bass output by -12 dB <ref> [[Bass_Line_Out#Bass_Line_Out_and_B1_behavior_2|L1 Model II Bass Line Out]]</ref>
-#You can continue to use the ToneMatch cable between the T1 and L1 Model II (no need to use a ToneMatch Power Supply)
-====If you have a third-party mixer====
+{{L1 Model II with Sub1/Sub2}}
-#Connect a sub or aux line out to Sub1/Sub2 Input 1.
-#On the Sub1/Sub2 set the LPF setting to L1.
-#DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
 === Cooling ===