Bose Portable PA Knowledge

Template:L1 Model II with Sub1/Sub2: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
 
(One intermediate revision by the same user not shown)
Line 19: Line 19:


#On the Sub1/Sub2 set the LPF setting to L1.
#On the Sub1/Sub2 set the LPF setting to L1.
#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose because the L1 Model II crossover is set at 200 Hz, so either setting will work.
#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz, and either setting will work.
#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.


Line 29: Line 29:
#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.
#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.
#On the Sub1/Sub2 set the LPF setting to L1.
#On the Sub1/Sub2 set the LPF setting to L1.
#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF.
#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz so that either setting will work.  
It doesn't matter which setting you choose because the L1 Model II crossover is set at 200 Hz, so either setting will work.
#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.


Retrieved from "https://boseperformer.com/Template:L1_Model_II_with_Sub1/Sub2"