Template:L1 Model II with Sub1/Sub2: Difference between revisions

(5 intermediate revisions by the same user not shown)

Line 19:

#On the Sub1/Sub2 set the LPF setting to L1.

#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz, and either setting will work.

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

Line 25:

Line 26:

#On the mixer route all inputs to a single mono output. More information - [[Stereo Mixer to Mono L1®]]

#Connect the mixer output to the {{Model II}} Analog Input

#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.

#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]

#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.

#On the Sub1/Sub2 set the LPF setting to L1.

#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz so that either setting will work.

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

@@ Line 19: / Line 19: @@
 #On the Sub1/Sub2 set the LPF setting to L1.
+#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz, and either setting will work.
 #DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
@@ Line 25: / Line 26: @@
 #On the mixer route all inputs to a single mono output.  More information - [[Stereo Mixer to Mono L1®]]
 #Connect the mixer output to the {{Model II}} Analog Input
-#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.
+#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]
 #Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.
 #On the Sub1/Sub2 set the LPF setting to L1.
+#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz so that either setting will work.
 #DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.