Template:L1 Model II with Sub1/Sub2: Difference between revisions

(10 intermediate revisions by the same user not shown)

Line 10:

====If you have a third-party mixer====

#Connect ~~a sub or aux line out~~ to Sub1/Sub2 Input 1.

DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

===== Mixer to Sub1/Sub2 to {{Model II}} =====

#On the mixer route all inputs to a single mono output. More information - [[Stereo Mixer to Mono L1®]]

#Connect the mixer output to the Sub1/Sub2 Input 1

#Connect the Sub1/Sub2 Line Out 1 to the {{Model II}} Analog Input

#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]

#On the Sub1/Sub2 set the LPF setting to L1.

#~~DON~~'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz, and either setting will work.

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

===== Mixer to {{Model II}} and Sub =====

This method is known as '''Aux Fed Sub'''

#On the mixer route all inputs to a single mono output. More information - [[Stereo Mixer to Mono L1®]]

#Connect the mixer output to the {{Model II}} Analog Input

#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]

#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.

#On the Sub1/Sub2 set the LPF setting to L1.

#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz so that either setting will work.

#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.

----

@@ Line 10: / Line 10: @@
 ====If you have a third-party mixer====
-#Connect a sub or aux line out to Sub1/Sub2 Input 1.
+DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
+===== Mixer to Sub1/Sub2 to {{Model II}} =====
+#On the mixer route all inputs to a single mono output. More information - [[Stereo Mixer to Mono L1®]]
+#Connect the mixer output to the Sub1/Sub2 Input 1
+#Connect the Sub1/Sub2 Line Out 1 to the {{Model II}} Analog Input
+#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]
 #On the Sub1/Sub2 set the LPF setting to L1.
-#DON'T connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
+#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz, and either setting will work.
+#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
+===== Mixer to {{Model II}} and Sub =====
+This method is known as '''Aux Fed Sub'''
+#On the mixer route all inputs to a single mono output.  More information - [[Stereo Mixer to Mono L1®]]
+#Connect the mixer output to the {{Model II}} Analog Input
+#Set the {{Model II}} Analog Input Trim to 10:00 o'clock. You adjust to suit so you see solid green.<br>[[File:Model II Analog Input Level Green.png|link=Model_II#Analog_Input||Model II Analog Input]]
+#Connect the mixer Sub or Aux line out to Sub1/Sub2 Input 1.
+#On the Sub1/Sub2 set the LPF setting to L1.
+#On the Sub1/Sub2 set the Output EQ to Full Range OR HPF. <br>It doesn't matter which setting you choose since the L1 Model II crossover is set at 200 Hz so that either setting will work.
+#DO NOT connect Sub1/Sub2 to the L1 Model II Bass Line Out. That output is EQd for the B2 or B1.
 ----