Kemper Profiler Player with Digitech Trio+: Difference between revisions

(9 intermediate revisions by the same user not shown)

Line 3:

The Kemper Profiler Player (KPP) connections

===Overview ===

====You will need====

*Four standard 1/4 inch (6.3mm) Tip-Sleeve instrument cables

** Two for connecting to/from Trio+ and KPP

** One for guitar to Trio+

** One for Trio+ to Mixer or PA

*Your guitar, Kemper Profiler Player, and Digitech Trio+

==== Connections ====

The Kemper Profiler Player (KPP) connections to Digitech Trio+ (Trio+)

*Trio+ FX SEND (Trio+ top left) goes to KPP Input

*KPP Monitor Out (with KPP Output Monitor Source set to Master Mono) goes to Trio+ FX RETURN (Trio+ top right). It doesn't matter which KPP output you connect to (Left or Right).

~~Note:~~ The Mixer Output mix will add cabinet emulation to the guitar signal. ~~Turn off~~ the ~~Cabinet in~~ the KPP ~~if you don't like the sound~~. ~~I haven't found a way~~ to ~~disable~~ the cabinet emulation in the Trio+.

=== Concepts ===

This setup lets the Trio+ generate its backing track from your clean guitar and apply the full Kemper sound to what you hear and record.

# This approach ensures that both the Trio+ and the KPP get a clean guitar signal

## When playing along Trio+ backing tracks, you will hear the guitar signal processed by the KPP

## When using the Trio+ Looper, the guitar signal that gets looped will include all KPP processing

=== Step by Step ===

#Plug your guitar into the Trio+

#Use a patch cable to connect Trio+ FX SEND to Kemper Profiler Player Input.

#Use a patch cable to connect Kemper Profiler Player Monitor Out (set to Master Mono) to Trio+ FX RETURN.

#Connect the Trio+ Mixer Out to your mixer or PA, OR connect your headphones to the Trio+ headphone output

#Adjust output and return levels for clean, balanced sound.

===Notes ===

# The Mixer Output mix Trio+ Mixer Output) will add cabinet emulation to the guitar signal. If the resulting sound is too “cab sim heavy,” disable the KPP cab module. <br>

In Rig Manager, Output section, set Monitor source to Master Mono

# Another approach to overcome the Trio+ cabinet emulation is to use two channels on the mixer.

#* Trio+ Mixer Out

#* Trio+ Amp Out (this does not include Trio+ cabinet emulation)

[[File:KPP with Trio+B.jpg]]

[~~https~~:~~//digitech.com/wp-content/uploads/2022/09/DigiTech_TrioPlus_Manual~~.pdf Digitech Trio+ Manual]

[[Media:DigiTech TrioPlus Manual.pdf|Digitech Trio+ Manual]]

----

@@ Line 3: / Line 3: @@
-The Kemper Profiler Player (KPP) connections
+===Overview ===
+====You will need====
+*Four standard 1/4 inch (6.3mm) Tip-Sleeve instrument cables
+** Two for connecting to/from Trio+ and KPP
+** One for guitar to Trio+
+** One for Trio+ to Mixer or PA
+*Your guitar, Kemper Profiler Player, and Digitech Trio+
+==== Connections ====
+The Kemper Profiler Player (KPP) connections to Digitech Trio+ (Trio+)
 *Trio+ FX SEND (Trio+ top left) goes to KPP Input
 *KPP Monitor Out (with KPP Output Monitor Source set to Master Mono) goes to Trio+ FX RETURN (Trio+ top right). It doesn't matter which KPP output you connect to (Left or Right).
-Note: The Mixer Output mix will add cabinet emulation to the guitar signal. Turn off the Cabinet in the KPP if you don't like the sound. I haven't found a way to disable the cabinet emulation in the Trio+.
+=== Concepts ===
+This setup lets the Trio+ generate its backing track from your clean guitar and apply the full Kemper sound to what you hear and record.
+# This approach ensures that both the Trio+ and the KPP get a clean guitar signal
+## When playing along Trio+ backing tracks, you will hear the guitar signal processed by the KPP
+## When using the Trio+ Looper, the guitar signal that gets looped will include all KPP processing
+=== Step by Step ===
+#Plug your guitar into the Trio+
+#Use a patch cable to connect Trio+ FX SEND to  Kemper Profiler Player Input.
+#Use a patch cable to connect  Kemper Profiler Player Monitor Out (set to Master Mono) to Trio+ FX RETURN.
+#Connect the Trio+ Mixer Out to your mixer or PA, OR connect your headphones to the Trio+ headphone output
+#Adjust output and return levels for clean, balanced sound.
+===Notes ===
+# The Mixer Output mix Trio+ Mixer Output) will add cabinet emulation to the guitar signal. If the resulting sound is too “cab sim heavy,” disable the KPP cab module. <br>
+In Rig Manager, Output section, set Monitor source to Master Mono
+# Another approach to overcome the Trio+ cabinet emulation is to use two channels on the mixer.
+#* Trio+ Mixer Out
+#* Trio+ Amp Out (this does not include Trio+ cabinet emulation)
+[[File:KPP with Trio+B.jpg]]
-[https://digitech.com/wp-content/uploads/2022/09/DigiTech_TrioPlus_Manual.pdf Digitech Trio+ Manual]
+[[Media:DigiTech TrioPlus Manual.pdf|Digitech Trio+ Manual]]
 ----