Bose Portable PA Knowledge

B1 Bass Module: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,074 edits
VisualWikitext
m formatting and updates for L1 Model 1S
 
(One intermediate revision by the same user not shown)
Line 133: Line 133:
A good source for the correct cables is  
A good source for the correct cables is  


[http://www.audiopile.net/products/BOSE_L1/BOSE_L1_Products.shtml http://www.audiopile.net]  
[http://www.audiopile.net/NL413GA Audiopile.net NL413GA | NL4 Speakon equipped 13/4 Speaker Cable]


for example
;Note: If you have an L1 Model 1S or L1 Model II - do NOT add a 10k resistor to the cable. That's only required with an L1® Model I or L1® Classic and ONLY if you are using a B2. It is not required with B1 bass modules.
[http://www.audiopile.net/NL413GA NL413GA | NL4 Speakon equipped 13/4 Speaker Cable]


Note: If you have an L1 Model 1S or L1 Model II - do NOT add a 10k resistor to the cable. That's only required with an L1® Model I or L1® Classic.
Consider getting 90-degree ends like this:  
 
Consider getting 90 degree ends like this:  
[[File:NL4FRX.jpg|link=http://www.audiopile.net/NL4FRX|Image=NL4 400w.jpg|200px|NL-4 speaker cable]]
[[File:NL4FRX.jpg|link=http://www.audiopile.net/NL4FRX|Image=NL4 400w.jpg|200px|NL-4 speaker cable]]


Retrieved from "https://boseperformer.com/B1_Bass_Module"