S1 Pro+ Wireless Microphone with T4S: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
## S1 Pro+ | ## S1 Pro+ | ||
## S1 Pro+ XLR Wireless Transmitter | ## S1 Pro+ XLR Wireless Transmitter | ||
## Dynamic microphone (this won't work with a microphone that requires phantom power | ## Dynamic microphone (this won't work with a microphone that requires phantom power) | ||
## T4S or T8S | ## T4S or T8S (This could also work with a T1) | ||
## ToneMatch Power Supply | ## ToneMatch Power Supply | ||
## 1/4-inch (6.3 mm) Tip Ring Sleeve to two 1/4-inch (6.3 mm) Tip-Sleeve "Insert" Cable | ## 1/4-inch (6.3 mm) Tip Ring Sleeve to two 1/4-inch (6.3 mm) Tip-Sleeve "Insert" Cable | ||
| Line 19: | Line 19: | ||
#* Connect the "Ring" connector to the T4S Right Output. | #* Connect the "Ring" connector to the T4S Right Output. | ||
#* Make sure all your T4S inputs are panned hard Right (or connect the Left output to the S1 Pro+ channel that you're not using for the wireless microphone using the optional 1/4-inch (6.3 mm) Tip Ring Sleeve cable mentioned above in point 1.7.) | #* Make sure all your T4S inputs are panned hard Right (or connect the Left output to the S1 Pro+ channel that you're not using for the wireless microphone using the optional 1/4-inch (6.3 mm) Tip Ring Sleeve cable mentioned above in point 1.7.) | ||
# Use the Bose App to set the S1 Pro+ ToneMatch Preset to Full Range Flat Response (or turn the ToneMatch Preset off). | |||
Optional: | |||
Use can repeat the steps above for the second S1 Pro+ Channel and Wireless Transmitter for a second microphone or an instrument (e.g. guitar). | |||