L1 Pro to S1 Pro: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 1:

To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the ~~loudspeaker~~

To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension to the L1 Pro

#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two

* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so ~~use~~ one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL. The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. ~~See~~ the ~~picture at~~ the ~~bottom of this article for details~~.

#* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so connect it to one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL.

#* The {{S1 Pro}} XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output may be too hot for the XLR inputs. If you see solid red on the {{S1 Pro}} turn down the channel volume.

#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.

@@ Line 1: / Line 1: @@
 {{L1 Pro icon}} {{S1 Pro icon}}
-To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the loudspeaker
+To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension to the L1 Pro
 #Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two
-* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so use one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL. The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. See the picture at the bottom of this article for details.
+#* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so connect it to one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL.
+#* The {{S1 Pro}} XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output may be too hot for the XLR inputs. If you see solid red on the {{S1 Pro}} turn down the channel volume.
 #Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.