T4S ToneMatch Mixer Monitor Outputs: Difference between revisions

(3 intermediate revisions by the same user not shown)

Line 4:

;How do I set up a powered monitor with my {{T4S}} and an L1 with at ToneMatch Port? ({{Model II}} or {{Model 1S}} or {{L1 Pro System}})?

* If you are using an L1 Pro, L1 Compact, or S1 Pro see [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]

[[File:T4S Monitor Outputs Summary.png|400px]]

Line 36:

Line 37:

[[File:T4S Phones.jpg|300px]]

You can use the T4S Headphone output as a source for a ~~monitor~~.

You can use the T4S Headphone output as a source for a or remote powered loudspeaker (e.g. S1 Pro, L1 Compact, L1 Model II, L1 Pro).

;NOTE If you connect a 1/4 inch (6.3mm) Tip-Sleeve jack to the Headphone output, you will get only the Left channel. Anything panned hard Right will not be heard through this connection. This applies to wireless systems that use a 1/4 inch (6.3mm) Tip-Sleeve.

;NOTE If you connect a 1/4 inch (6.3mm) Tip-Sleeve jack to the Headphone output, you will get only the Left channel. Anything panned hard Right will not be heard through this connection. This applies to wireless systems that use a 1/4 inch (6.3mm) Tip-Sleeve jack.

Since the T4S ToneMatch Port (with power) outputs only the Right channel, this may or may not be useful to you.

See also: [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]

@@ Line 4: / Line 4: @@
 <td valign="top">
 ;How do I set up a powered monitor with my {{T4S}} and an L1 with at ToneMatch Port? ({{Model II}} or {{Model 1S}} or {{L1 Pro System}})?
+* If you are using an L1 Pro, L1 Compact, or S1 Pro see  [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]
 [[File:T4S Monitor Outputs Summary.png|400px]]
@@ Line 36: / Line 37: @@
 [[File:T4S Phones.jpg|300px]]
-You can use the T4S Headphone output as a source for a monitor.
+You can use the T4S Headphone output as a source for a or remote powered loudspeaker (e.g. S1 Pro, L1 Compact, L1 Model II, L1 Pro).
-;NOTE If you connect a 1/4 inch (6.3mm) Tip-Sleeve  jack to the Headphone output, you will get only the Left channel. Anything panned hard Right will not be heard through this connection. This applies to wireless systems that use a 1/4 inch (6.3mm) Tip-Sleeve.
+;NOTE If you connect a 1/4 inch (6.3mm) Tip-Sleeve  jack to the Headphone output, you will get only the Left channel. Anything panned hard Right will not be heard through this connection. This applies to wireless systems that use a 1/4 inch (6.3mm) Tip-Sleeve jack.
 Since the T4S ToneMatch Port (with power) outputs only the Right channel, this may or may not be useful to you.
-See also:  [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]
+See also:
+* [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]
+* [[T4S/T8S Headphone Output to L1 Pro]]