Bose Portable PA Knowledge

Line 6 Helix to L1 Pro: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
mNo edit summary
mNo edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{L1 Pro icon}}
{{DivToc
{{DivToc


Line 37: Line 38:


===Balanced 1/4 inch tip-ring-sleeve connection (Line Level) ===
===Balanced 1/4 inch tip-ring-sleeve connection (Line Level) ===
Set the Helix 1/4 outputs to Line level and use 1/4 inch (6.3 mm) Tip-Ring-Sleeve cables to inputs 1, 2, or 3. If connecting to inputs 1 or 2 set the ToneMatch switch to Off and Tone controls to 12:00 o'clock and Reverb off.
Set the Helix 1/4 outputs to Line level and use 1/4 inch (6.3 mm) Tip-Ring-Sleeve cables to inputs 1, 2, or 3. If connecting to inputs 1 or 2 set the ToneMatch switch to OFF and Tone controls to 12:00 o'clock and Reverb off.


===Balanced XLR to 1/4 inch tip-ring-sleeve connection mono (Line Level) ===
===Balanced XLR to 1/4 inch tip-ring-sleeve connection mono (Line Level) ===
This leaves inputs 1&2 open for other inputs.
This leaves inputs 1 and 2 open for other inputs.
 
Set the Helix XLR output(s) to Line level if using an XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cable.  


Set the output level on the Helix to Line level if using the XLR to 1/4 inch (6.3 mm) Tip-Ring-Sleeve
On the L1 Pro - running mono, connect to input 3 (that's as close to FRFR as you can get). If you want to run left/right outputs (there's no real point because the L1 Pro is mono anyway),  
On the L1 Pro - running mono, connect to input 3 (that's as close to FRFR as you can get). If you want to run left/right outputs (there's no real point because the L1 Pro is mono anyway),  
 
<!--
===Balanced XLR connection (Mic Level) ===
===Balanced XLR connection (Mic Level) ===
Set the XLR outputs to MIC level, you can use XLR cables to inputs 1 and 2. Set the ToneMatch switch to Off and Tone controls to 12:00 o'clock and Reverb off.
Set the Helix XLR outputs to MIC level to use XLR cables to L1 Pro inputs 1 and 2. Set the ToneMatch switch to OFF and Tone controls to 12:00 o'clock and Reverb off.
 
-->
===Ordinary guitar cable (avoid using cables longer than 6 meters) (Instrument Level) ===
===Ordinary guitar cable (avoid using cables longer than 6 meters) (Instrument Level) ===
Set the output on the Helix 1/4 inch output(s) to Instrument level and use an ordinary guitar cable (1/4 inch tip-sleeve) to inputs 1 or 2. Set the ToneMatch switch to Off and Tone controls to 12:00 o'clock and Reverb off.
Set the output on the Helix 1/4 inch output(s) to Instrument level and use an ordinary guitar cable (1/4 inch tip-sleeve) to inputs 1 or 2. Set the ToneMatch switch to OFF and Tone controls to 12:00 o'clock and Reverb off.


----
----
[[Category:Line 6]]
[[Category:Line 6]]
[[Category:Helix]]
[[Category:Helix]]
[[Category:Guitar]]
[[Category:Connections]]
[[Category:Connections]]
[[Category:L1 Pro]]
[[Category:L1 Pro]]
Retrieved from "https://boseperformer.com/Line_6_Helix_to_L1_Pro"