Bose Portable PA Knowledge

Template:S1 Pro with Sub1 or Sub2: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
mNo edit summary
 
(5 intermediate revisions by the same user not shown)
Line 7: Line 7:
For best results, the signal flow should go from   
For best results, the signal flow should go from   
# [[File:Sub1 Sub2 io panel to S1 Pro.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to  
# [[File:Sub1 Sub2 io panel to S1 Pro.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to  
# The Sub1 or Sub2 subwoofer LINE IN 1
# The Sub1 or Sub2 subwoofer LINE IN 1 ()
#* Set LINE IN EQ to '''L1'''
# The Sub1 or Sub2 subwoofer LINE OUT 1 to
# The Sub1 or Sub2 subwoofer LINE OUT 1 to
# The {{S1 Pro}} with channel volume set to 10 o'clock.
# The {{S1 Pro}} with channel volume set to 10 o'clock.
;Note these settings on the Sub1 or Sub2
:👉 Set LINE IN EQ to '''L1'''
:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)


Set up this way,  
Set up this way,  
Line 16: Line 19:
# The {{S1 Pro}} handles frequencies above 150 Hz
# The {{S1 Pro}} handles frequencies above 150 Hz


The picture shows a stereo setup, but illustrates the principles for mono.  The signal flow is from left to right.
;Mono - Example with a T4S as the audio source
* Start with the Volume on S1 Pro and Sub, as shown. Adjust as necessary from there.
 
[[File:T4S to Sub to S1 Pro.jpg|800px|T4S to Sub to S1 Pro]]
 
 
The picture shows a stereo setup.  The signal flow is from left to right.


[[File:S1 Pro with Sub.jpg|560px]]
[[File:S1 Pro with Sub.jpg|560px]]
Retrieved from "https://boseperformer.com/Template:S1_Pro_with_Sub1_or_Sub2"