Template:S1 Pro with Sub1 or Sub2: Difference between revisions

(8 intermediate revisions by the same user not shown)

Line 7:

For best results, the signal flow should go from

# [[File:Sub1 Sub2 io panel to S1 Pro.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to

# The Sub1 or Sub2 subwoofer LINE IN 1

# The Sub1 or Sub2 subwoofer LINE IN 1 ()

# The Sub1 or Sub2 subwoofer LINE OUT 1 to

# The {{S1 Pro}} with channel volume set to 10 o'clock.

;Note these settings on the Sub1 or Sub2

:👉 Set LINE IN EQ to '''L1'''

:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)

Set up this way,

Line 15:

Line 19:

# The {{S1 Pro}} handles frequencies above 150 Hz

The picture shows a stereo setup~~, but illustrates the principles for mono~~. The signal flow is from left to right.

;Mono - Example with a T4S as the audio source

* Start with the Volume on S1 Pro and Sub, as shown. Adjust as necessary from there.

[[File:T4S to Sub to S1 Pro.jpg|800px|T4S to Sub to S1 Pro]]

The picture shows a stereo setup. The signal flow is from left to right.

[[File:S1 Pro with Sub.jpg|560px]]

Line 26:

Line 36:

[[File:XLRFemale to 14trs.jpg|300px]]

If you use an XLR to XLR cable, the signal ~~will likely~~ be too hot for the {{S1 Pro}}

If you use an XLR to XLR cable, the signal may be too hot for the {{S1 Pro}}.

=== Alternative Connection ===

@@ Line 7: / Line 7: @@
 For best results, the signal flow should go from
 # [[File:Sub1 Sub2 io panel to S1 Pro.jpg|thumb|Sub io panel]]The signal source (e.g., {{ToneMatch Mixer}}, mixer, DJ console) output to
-# The Sub1 or Sub2 subwoofer LINE IN 1
+# The Sub1 or Sub2 subwoofer LINE IN 1 ()
 # The Sub1 or Sub2 subwoofer LINE OUT 1 to
 # The {{S1 Pro}} with channel volume set to 10 o'clock.
+;Note these settings on the Sub1 or Sub2
+:👉 Set LINE IN EQ to '''L1'''
+:👉 Set LINE OUT EQ to '''S1''' (Press and hold LINE OUT EQ button for 4 seconds)
 Set up this way,
@@ Line 15: / Line 19: @@
 # The {{S1 Pro}} handles frequencies above 150 Hz
-The picture shows a stereo setup, but illustrates the principles for mono.  The signal flow is from left to right.
+;Mono - Example with a T4S as the audio source
+* Start with the Volume on S1 Pro and Sub, as shown. Adjust as necessary from there.
+[[File:T4S to Sub to S1 Pro.jpg|800px|T4S to Sub to S1 Pro]]
+The picture shows a stereo setup.  The signal flow is from left to right.
 [[File:S1 Pro with Sub.jpg|560px]]
@@ Line 26: / Line 36: @@
 [[File:XLRFemale to 14trs.jpg|300px]]
-If you use an XLR to XLR cable, the signal will likely be too hot for the {{S1 Pro}}
+If you use an XLR to XLR cable, the signal may be too hot for the {{S1 Pro}}.
-<HTML><iframe width="560" height="315" src="https://www.youtube.com/embed/GZGRwhRXRNc?start=2644" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
+<HTML><iframe width="560" height="315" src="https://www.youtube.com/embed/GZGRwhRXRNc?start=2659" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html>
 === Alternative Connection ===