Template:Kemper Profiler to Bose Portable PA: Difference between revisions

Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the [[zEQ]] or [[ParaEQ]] to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler.

==== Connections ====

Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)).  

* Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable.

* XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).

Profiler Main Outputs:These are your main stereo outputs. Use these outputs to connect to a mixing desk in a recording studio, or to the front-of-house mixer in a live situation. These outputs deliver the entire Rig: amp, cabinet, and all effects. You have a choice of XLR (balanced) or quarter-inch TS-jacks (unbalanced). The XLR outputs are protected against 48V phantom power fed by a mixing desk. However, you should avoid feeding phantom power into the PROFILER if you want the best audio quality. Like all inputs and outputs, it offers a ground lift to prevent a loop hum.  

Source: Kemper Main Manual

==== Settings ====

In the Profile Output section, page 1, Set Main Output to Master Mono (or Master Stereo if you are running two L1 systems).

===== Connections =====

==== L1 Model 1S/L1 Model II ====

{{S1 Pro icon}}Connect the Profiler Main Output to Channel 1 or 2.  

===== Connections =====

Another option is to connect the Profiler headphone output to the S1 Pro Input 3 (the 1/8 inch (3mm) input). Input 3 is stereo.

===== Connections =====