Bose Portable PA Knowledge

T4S Connection to L1 Model I: Difference between revisions

← Older edit
ST (talk | contribs)
Bureaucrats, Interface administrators, Administrators
20,075 edits
VisualWikitext
mNo edit summary
mNo edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Classic icon}}{{T4S icon}}
{{Classic icon}}{{T4S icon}}
You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a T1®. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]]
<div class="tocdiv">
    <div>__TOC__</div>
    <div><h2>Introduction</h2>
You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a {{T1}}. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]]    
    </div>
</div> 
=== {{T4S}} to one {{Classic}}/{{Model I}} system===
 


There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.
There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.
Line 8: Line 16:
#Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)<br><br>[[File:T4S Analog Right Output.png]]<br>[[File:L1 Model I Channel 3 Input.png|800]]<br>OR<br>
#Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)<br><br>[[File:T4S Analog Right Output.png]]<br>[[File:L1 Model I Channel 3 Input.png|800]]<br>OR<br>
#Leave your inputs panned to center (the default setting), and connect
#Leave your inputs panned to center (the default setting), and connect
#*T4S Left output to the L1® Classic Channel 3<br>try setting the level to about 4
#*T4S Left output to the {{Classic}}/{{Model I}} Channel 3<br>try setting the level to about 4
#*T4S Right output to the L1® Classic Channel 4<br>try setting the level to about 4
#*T4S Right output to the {{Classic}}/{{Model I}} Channel 4<br>try setting the level to about 4
<br>[[File:T4S Analog Outputs.png]]<br>[[File:L1 Model I Channel 34 Inputs.png|800]]
<br>[[File:T4S Analog Outputs.png]]<br>[[File:L1 Model I Channel 34 Inputs.png|800]]




When using a T1® or T4S with the L1® Classic, you don't need to use the R1 Remote.
When using a {{T1}} or {{T4S}} with the L1® Classic, you don't need to use the R1 Remote.
 
=== {{T4S}} to two {{Classic}}/{{Model I}} systems ===
 
To run a {{T4S}} with two {{Model I}} or {{Classic}}
 
On the {{T4S}} Pan your inputs left and right as required, but for best results, pan your inputs to one side or the other, but not up the middle
*{{T4S}} Left output to the Left {{Classic}}/{{Model I}} Channel 3<br>try setting the level to about 4
*{{T4S}} Right output to the Right {{Classic}}/{{Model I}} Channel 3<br>try setting the level to about 4
 
[[File:T4S to two L1 Classic Model I.jpg]]
 
When using a {{T1}} or {{T4S}} with the L1® Classic, you don't need to use the R1 Remote.




Retrieved from "https://boseperformer.com/T4S_Connection_to_L1_Model_I"