Zoom H4 and T1® Usage: Difference between revisions

(2 intermediate revisions by 2 users not shown)

Line 65:

# Refer to your T1 ToneMatch Audio Engine manual for information regarding the “TAP” button options. Tap settings can be: pre-fader, post-EQ and effects, or post-fader.

=== Video ===

Here's a quick video on enabling the AUX out capability of each channel on the {{T1}}.

~~[http~~://www.youtube.com/~~watch?v~~=~~ao6_V1Uvog8 Click here to view the YouTube video.]~~

<html>

</html>

* With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector. Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of each channel, whether it’s a microphone, iPod, guitar, etc.

* Setting the "recording mix" of all you T1 channels requires you to listen to the AUX output by some method, or to leave each channels Level mix at its default setting of 50%. The easy approach is to leave everything at 50%. This ~~insures~~ nothing ends up too hot in the mix. (It appears you can ~~taylor~~ your recording mix by adjusting the Level percentage of each channel, but I haven't taken the time to experiment with this capability, as of yet.) NOTE: Changing this Level setting does not change any MAIN output levels from your T1.

* Setting the "recording mix" of all you T1 channels requires you to listen to the AUX output by some method, or to leave each channels Level mix at its default setting of 50%. The easy approach is to leave everything at 50%. This ensures nothing ends up too hot in the mix. (It appears you can tailor your recording mix by adjusting the Level percentage of each channel, but I haven't taken the time to experiment with this capability, as of yet.) NOTE: Changing this Level setting does not change any MAIN output levels from your T1.

Line 79:

Line 84:

* Be sure to change your inputs on the Zoom H4 from the default "internal mics" to Input Connectors 1 & 2. Refer to the Zoom H4 Users Manual for details on selecting inputs, if needed. This enables you to plug in the cables from your {{T1}}s to the H4 for recording, otherwise, you'll still be recording with the internal mics of the H4!

== L1 Configurations ==

@@ Line 65: / Line 65: @@
 # Refer to your T1 ToneMatch Audio Engine manual for information regarding the “TAP” button options.  Tap settings can be: pre-fader, post-EQ and effects, or post-fader.
+=== Video ===
 Here's a quick video on enabling the AUX out capability of each channel on the {{T1}}.
-[http://www.youtube.com/watch?v=ao6_V1Uvog8 Click here to view the YouTube video.]
+<html>
+<iframe max-width="560" height="auto" src="https://www.youtube.com/embed/ao6_V1Uvog8" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+</html>
 * With the Zoom H4 connected and used as a recorder in this configuration you can expect to get exactly what you would hear from the T1 AUX OUT connector.  Provided you have enabled the AUX output on each T1 channel, you’ll hear what is plugged into the input of each channel, whether it’s a microphone, iPod, guitar, etc.
-* Setting the "recording mix" of all you T1 channels requires you to listen to the AUX output by some method, or to leave each channels Level mix at its default setting of 50%.  The easy approach is to leave everything at 50%.  This insures nothing ends up too hot in the mix.  (It appears you can taylor your recording mix by adjusting the Level percentage of each channel, but I haven't taken the time to experiment with this capability, as of yet.) NOTE: Changing this Level setting does not change any MAIN output levels from your T1.
+* Setting the "recording mix" of all you T1 channels requires you to listen to the AUX output by some method, or to leave each channels Level mix at its default setting of 50%.  The easy approach is to leave everything at 50%.  This ensures nothing ends up too hot in the mix.  (It appears you can tailor your recording mix by adjusting the Level percentage of each channel, but I haven't taken the time to experiment with this capability, as of yet.) NOTE: Changing this Level setting does not change any MAIN output levels from your T1.
@@ Line 79: / Line 84: @@
 * Be sure to change your inputs on the Zoom H4 from the default "internal mics" to Input Connectors 1 & 2. Refer to the Zoom H4 Users Manual for details on selecting inputs, if needed.  This enables you to plug in the cables from your {{T1}}s to the H4 for recording, otherwise, you'll still be recording with the internal mics of the H4!
 == L1 Configurations ==