L1® System Holistic View: Difference between revisions

(14 intermediate revisions by 2 users not shown)

Line 1:

<big>''' A Holistic View of the L1~~&trade~~ '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>

<big>''' A Holistic View of the {{L1 nl}} '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>

== The {{L1}} System (Physical) ==

Here is one way you can think about the {{L1}} System.

[[Image:SpeakerPower01.gif]]

=== {{L1 CR}} as one loudspeaker ===

Think of the {{L1 CR}} (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)<ref name="HilmarSaid">[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/8151078751?r=8511074851#8511074851 Quoting Hilmar-at-Bose]</ref> supplied by 500 watts for the {{Classic}} and 250 watts for the {{Model I}}. Note: the {{Model I}} provides the same audible output. It is just more efficient than the {{Classic}}.

=== Two {{B1}}s as one bass loudspeaker ===

Think of the pair of {{B1}}s (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)<ref name="HilmarSaid" /> drivers supplied by 250 watts. <ref>two {{B1}} loudspeakers connected draws up to 250 watts at 4 ohms</ref>

~~The~~ {{~~L1 CR~~}} (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)<ref name="HilmarSaid">[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/8151078751?r=8511074851#8511074851 Quoting Hilmar-at-Bose]</ref> supplied by 500 watts.

That's 750 watts in total for the {{Classic}} and 500 watts total for the {{Model I}}

The ~~pair of~~ {{B1}}s (~~Purple highlight~~) is ~~a single bass loudspeaker with 4 (6.5 inch)<ref name="HilmarSaid" /> drivers supplied by 250 watts. <ref>two~~ {{B1}} ~~loudspeakers connected draws up to 250 watts at 4 ohms</ref>~~

== The {{L1}} System (Amplifiers & Power) ==

''' Note: This information below is applicable to the {{Classic}} and not the {{Model I}}'''

~~That~~'~~s 750 watts in total.~~

[[Image:SpeakerPower02.gif]]

=== {{L1 CR}} ===

The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.

This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant.

=== {{B1}}s ===

If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>

{{B1}}s

If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle.

~~If you break~~ the ~~pair of B1s in half, and use just one of~~ them~~, it draws 125 watts~~.~~<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>~~

~~If you don't use the B1s at all, the amp that is normally used to drive them is idle.~~

~~The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.~~

This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't important.

== Use the proper cables ==

=== Model I ===

The {{Model I}} handles the B1s the same way, but with a more efficient design provides the same audible output from the {{L1 CR}} with a single 250 watt amp.

Line 26:

Line 38:

[[~~category~~:~~L1™~~ System]]

[[Category:L1® System]]

@@ Line 1: / Line 1: @@
-<big>''' A Holistic View of the L1&trade '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>
+<big>''' A Holistic View of the {{L1 nl}} '''</big><ref>[http://bose.infopop.cc/groupee/forums/a/tpc/f/867107664/m/5551058832/r/5551058832 Originally appeared in the {{forum}}]</ref>
+{{Classic icon}}
+== The {{L1}} System (Physical) ==
+Here is one way you can think about the {{L1}} System.
 [[Image:SpeakerPower01.gif]]
+=== {{L1 CR}} as one loudspeaker ===
+Think of the {{L1 CR}} (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)<ref name="HilmarSaid">[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/8151078751?r=8511074851#8511074851 Quoting Hilmar-at-Bose]</ref> supplied by 500 watts for the {{Classic}} and 250 watts for the {{Model I}}. Note: the {{Model I}} provides the same audible output. It is just more efficient than the {{Classic}}.
+=== Two {{B1}}s as one bass loudspeaker  ===
+Think of the pair of {{B1}}s (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)<ref name="HilmarSaid" /> drivers supplied by 250 watts. <ref>two {{B1}} loudspeakers connected draws up to 250 watts at 4 ohms</ref>
-The {{L1 CR}} (Yellow highlight) is a single loudspeaker with 24 drivers (2.5 inch)<ref name="HilmarSaid">[http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/8151078751?r=8511074851#8511074851 Quoting Hilmar-at-Bose]</ref> supplied by 500 watts.
+That's 750 watts in total for the {{Classic}} and 500 watts total for the {{Model I}}
-The pair of {{B1}}s (Purple highlight) is a single bass loudspeaker with 4 (6.5 inch)<ref name="HilmarSaid" /> drivers supplied by 250 watts. <ref>two {{B1}} loudspeakers connected draws up to 250 watts at 4 ohms</ref>
+== The {{L1}} System (Amplifiers & Power) ==
+''' Note: This information below is applicable to the {{Classic}} and not the {{Model I}}'''
-That's 750 watts in total.
 [[Image:SpeakerPower02.gif]]
+=== {{L1 CR}} ===
+The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.
+This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the {{L1 CR}} and the other drives the bottom half. Because the {{L1 CR}} should always be operated as a single unit, what happens when you break it down isn't relevant.
+=== {{B1}}s ===
+If you break the pair of {{B1}}s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
-{{B1}}s
+If you don't use the {{B1}}s at all, the amp that is normally used to drive them is idle.
-If you break the pair of B1s in half, and use just one of them, it draws 125 watts.<ref>one {{B1}} loudspeaker connected draws up to 125 watts at 8 ohms</ref>
-If you don't use the B1s at all, the amp that is normally used to drive them is idle.
-The {{L1 CR}} This is one loudspeaker that happens to break down into two pieces for travel.
-This is driven by two separate amps, but this is not important because under normal circumstances both amps are driven identically. One drives the top half of the L1 and the other drives the bottom half. Because the L1 should always be operated as a single unit, what happens when you break it down isn't important.
+== Use the proper cables ==
+{{B1 Cable Warning}}
+=== Model I ===
+{{Model I icon}}
+The {{Model I}} handles the B1s the same way, but with a more efficient design provides the same audible output from the {{L1 CR}} with a single 250 watt amp.
@@ Line 26: / Line 38: @@
 <references/>
-[[category:L1™ System]]
+[[Category:L1® System]]