L1 Cylindrical Radiator® loudspeaker: Difference between revisions

(One intermediate revision by the same user not shown)

Line 33:

=== Adjusting the Length ===

The Bayonet can be adjusted for easier mounting/dismounting with lower ceilings.

Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal. Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>

Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal.

[[Image:BayonetShort.jpg]]

Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>

== Lower Half Only? ==

@@ Line 33: / Line 33: @@
 === Adjusting the Length ===
 The Bayonet can be adjusted for easier mounting/dismounting with lower ceilings.
-Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal. Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>
+Newer L1 Cylindrical Radiator(r) loudspeakers have bayonets with three holes. With the upper L1 on a table or floor, you can easily unscrew the two Phillips-head screws from the Bayonet and reposition the Bayonet so that it does not protrude as much out from the upper L1. This gains you an extra inch of space when mounting/dismounting the upper L1 in places where the ceiling height is less than ideal.
+[[Image:BayonetShort.jpg]]
+Contributed by Kyle-at-Bose <ref>[http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/3091053032/r/8851021972#8851021972 Kyle-at-Bose talks about Adjusting the length of the Bayonet in the Bose® Musicians Community Message Boards]</ref>
 == Lower Half Only? ==