L1® PackLite® A1 Amplifier / FAQ: Difference between revisions

</tr></table>

== The Technology ==

The A1 is designed for 4-ohm loudspeaker loads capable of 250W RMS. The MB4, MB24 and

=== Can I use two B1 bass modules with the A1 amplifier without the power stand? ===  

Includes the following:

'''L1™ Model II system with T1™ ToneMatch audio engine'''

'''L1™ Model II system'''

'''T1™ ToneMatch audio engine'''

'''T1 ToneMatch™ audio engine'''

Includes the following:

'''PackLite power amplifier Model A1'''

'''PackLite® Extended Bass Package'''

The PackLite® Extended Bass Package comes with:

=== What are the available accessories? ===  

This compact, powerful bass enclosure delivers the depth and impact of such instruments as bass guitar, drums and low voices. Low-pitched wind or stringed instruments, guitars and keyboards also can benefit from the additional low-end output that the B1 provides. Includes professional padded gig bag, and one cable to connect the B1 bass module to the power stand and slip cover.

A standard carrying cover for the B1 bass module. Cover is a direct replacement for the cover included with a new L1™ Model II system package.

Custom-designed to hold your B1 bass module. Incorporates our high-end construction features to protect from scuffs and scrapes on all six sides.

Designed for instruments that require additional headroom and increased output in the deep bass range, such as electric bass, bass drum and high-output playback of recorded dance music. The PackLite® power amplifier can power up to two additional B1 bass modules.

Standard nylon protective pouch for the A1 PackLite® power amplifier.

Standard, balanced tip-ring-sleeve 1/4" cable connects the A1 PackLite® power amplifier to a power stand.

Durable and form-fitted, the heavy-duty gig bag set will help protect the L1™ loudspeaker and power stand components during transport. Telescoping travel handle and roller wheels makes for a very easy transport of the power stand. The L1™ bag, lined with extra padding, comes with a shoulder strap. A rugged duffle bag contains convenient pockets and can hold the R1 remote control with plenty of room for cables and accessories.

Standard carrying bags for the power stand and L1™ loudspeaker. Set of three bags is a direct replacement for the set included with a new L1™ Model II or II system package.

Designed to connect a 120-volt power stand to an AC outlet.

=== Can you use 2-wire Speakon® cables to connect the A1 amplifier to B1 bass modules? ===  

No.  Only 4-wire Speakon® cables are to be used with the A1 amplifier. The additional 2 wires (<nowiki>+</nowiki>2 and -2) in the connector are used for sensing purposes. Upon connection, the signal is automatically adjusted (EQ and level) for 0, 1 or 2 B1 bass modules.

=== How can I tell if I<nowiki>’</nowiki>m using the correct Speakon® cable? ===  

If you plug in a 4-wire Speakon® cable to the Bass Module Out connector with music playing through, you will clearly hear the L1™ Model II system mute for a moment. If you are using an incorrect cable, such as a 2-wire Speakon® cable, the momentary muting will not occur.

=== Is there any pro audio gear that this is not compatible with? ===  

=== What is the limited warranty? ===  

=== Are there available accessories? ===  

=== What if the A1 amplifier fails during a performance? ===  

=== What is the warranty coverage on my A1? ===  

=== Is there an available hard case for the A1 amplifier? ===  

|}