Mixer / Mackie / 1202-VLZ: Difference between revisions

(9 intermediate revisions by the same user not shown)

Line 1:

~~<big>''' Mackie 1202-VLZ '''</big>~~

== Summary ==

Line 9:

Use the '''XLR''' - or - '''¼ inch phone jack''' (Tip-Sleeve) outputs to

* The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic]] and the [[R1 Remote]] Tone and Level Controls

* The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls

* The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].

Line 22:

Links:

* [http://mackie.com/pdf/1202vlzpro_om.pdf Mackie 1202-VLZ Manual]

* [http://mackie.com/pdf/1202vlzpro_om.pdf Mackie 1202-VLZ Pro Manual]

=== Notes about MIC/Line Switch ===

When using an XLR cable between the mixer and the Model I or Classic Power Stand, set the mixer Master Output Switch to '''MIC''' because the Model I / Classic Channel 1/2 XLR Inputs are designed to accept a '''Microphone level input'''.

[[Image:ModelIChannel1InputXLRisMIC.jpg]]

;The mixer allows you to match that requirement by using the MIC setting.

[[Image:Mackie1202OutputSwitch.jpg]]

Details of the MIC/Line Switch from pages 15 and 26 of the [http://mackie.com/pdf/1202vlzpro_om.pdf Mackie 1202-VLZ Pro Manual]

[[Image:Mackie1202VLZProOutputDiagram.jpg]]

@@ Line 1: / Line 1: @@
-<big>''' Mackie 1202-VLZ '''</big>
+{{Classic icon}}{{Model I icon}}
 == Summary ==
@@ Line 9: / Line 9: @@
 Use the '''XLR''' - or -   '''¼ inch phone jack''' (Tip-Sleeve) outputs to
-*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic]] and the [[R1 Remote]] Tone and Level Controls
+*  The {{PS1}} Channels 1 or 2 if you want to use the [[Presets/Model I and Classic|Presets]] and the [[R1 Remote]] Tone and Level Controls
 <br /> OR <br />
 *  The {{PS1}} Channels 3 or 4 if you prefer to leave Channels 1 or 2 open for other inputs. You will have to control Tone and relative Level (between the Channels) at your input source, as you do not have this control over Channels 3 and 4 in the {{PS1}} or the [[R1 Remote]].
@@ Line 22: / Line 22: @@
 Links:
-* [http://mackie.com/pdf/1202vlzpro_om.pdf  Mackie 1202-VLZ Manual]
+* [http://mackie.com/pdf/1202vlzpro_om.pdf  Mackie 1202-VLZ Pro Manual]
+=== Notes about MIC/Line Switch ===
+When using an XLR cable between the mixer and the Model I or Classic Power Stand, set the mixer  Master Output Switch to '''MIC''' because the Model I / Classic Channel 1/2 XLR Inputs are designed to accept a '''Microphone level input'''.
+[[Image:ModelIChannel1InputXLRisMIC.jpg]]
+;The mixer allows you to match that requirement by using the MIC setting.
+[[Image:Mackie1202OutputSwitch.jpg]]
+Details of the MIC/Line Switch from pages 15 and  26 of the [http://mackie.com/pdf/1202vlzpro_om.pdf  Mackie 1202-VLZ Pro Manual]
+[[Image:Mackie1202VLZProOutputDiagram.jpg]]