PS1 Powerstand Connections/Line Out/XLR: Difference between revisions

@@ Line 1: / Line 1: @@
-== XLR Line Outs Channels 1 and 2 ==
+== Line Outs (XLR balanced) for Channels 1 and 2 ==
 * post trim (+4 dBu nominal)
-For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to daisy-chain {{PS1}}s use a [[pad]] between the Systems, preferably the "end" of the cable (closest to the System receiving the signal).
+For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal).
 [[Image:PS1LineOutXLR.jpg]]
+This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see:
+[[PS1 Powerstand / Daisy Chain]]
 ----
 <references/>
-[[category:L1™ System]]
+[[category:L1® System]]
 [[category:PS1 Powerstand]]
 [[category:PS1 Powerstand Connections]]