|
|
| (3 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| == XLR Line Outs Channels 1 and 2 == | | == Line Outs (XLR balanced) for Channels 1 and 2 == |
| * post trim (+4 dBu nominal) | | * post trim (+4 dBu nominal) |
| For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). Most professional consoles will have a switchable -20 dB pad at the inputs to lower the input level if required. | | For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). |
|
| |
|
| The XLR Line out is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to daisy-chain {{PS1}}s a [[pad]] is recommended.
| |
|
| |
| <!--
| |
| [[Image:PS1LineOutXLR.jpg]] | | [[Image:PS1LineOutXLR.jpg]] |
| -->
| |
|
| |
| <html>
| |
| Try moving the mouse over the image below. If you have Java installed, you will see notes related to what you touch with the mouse.
| |
| <br />
| |
|
| |
| <APPLET CODEBASE="http://bose.infopop.cc/eve/forums/,s,8206048934,a,ga,ul,5151001421,ic,Y/" CODE="Balloon.class" WIDTH="600" HEIGHT="421">
| |
| <PARAM NAME="IMAGE" VALUE="http://toonz.ca/bose/wiki/images/5/52/PS1LineOutXLR.jpg">
| |
|
| |
| <PARAM NAME="HOTSPOT0" VALUE="0, 0,150, 200 ">
| |
| <PARAM NAME="HELPSTRING0" VALUE="Microphone or instrument input">
| |
|
| |
| <PARAM NAME="HOTSPOT1" VALUE="175, 0,75, 200 ">
| |
| <PARAM NAME="HELPSTRING1" VALUE="Trim affects signal present at Insert point">
| |
|
| |
| <PARAM NAME="HOTSPOT2" VALUE="251, 0,75, 200 ">
| |
| <PARAM NAME="HELPSTRING2" VALUE="Presets have no effect on Line out or Insert">
| |
|
| |
| <PARAM NAME="HOTSPOT3" VALUE="326, 0,75, 200 ">
| |
| <PARAM NAME="HELPSTRING3" VALUE="Line out is post Trim, that is, only the Trim setting has any effect on what is passed to the Line Out">
| |
|
| |
|
| |
| <PARAM NAME="HOTSPOT4" VALUE="400,0, 75,200">
| |
| <PARAM NAME="HELPSTRING4" VALUE="Signal present at 1/2 Insert is affected by Trim and Channel volume on the Remote Control">
| |
|
| |
| <PARAM NAME="HOTSPOT5" VALUE="500,200, 80,100">
| |
| <PARAM NAME="HELPSTRING5" VALUE="Volume on Remote affects 1/2 Insert, but NOT Line Out">
| |
|
| |
|
| |
| <PARAM NAME="ITEMCOUNT" VALUE="5">
| |
| </html>
| |
|
| |
|
| | This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see: |
| | [[PS1 Powerstand / Daisy Chain]] |
| ---- | | ---- |
| <references/> | | <references/> |
| | | |
|
| |
|
| [[category:L1™ System]] | | [[category:L1® System]] |
| [[category:PS1 Powerstand]] | | [[category:PS1 Powerstand]] |
| [[category:PS1 Powerstand Connections]] | | [[category:PS1 Powerstand Connections]] |