Noise Gate - Revision history

ST: /* Fine-Tuning */

2024-08-11T01:49:21Z

Fine-Tuning

← Older revision		Revision as of 01:49, 11 August 2024
Line 32:		Line 32:
	: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate		: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate
	;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).		;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).
	: You may find a slower Speed (higher value) gives a more gradual ~~the~~ cut-off, and this may sound more natural as a singer naturally lowers their volume at times.		: You may find a slower Speed (higher value) gives a more gradual cut-off, and this may sound more natural as a singer naturally lowers their volume at times.
	;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.		;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.
	:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different from Speed which affects how quickly the gate clamps down after the signal has passed.		:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different from Speed which affects how quickly the gate clamps down after the signal has passed.

ST at 15:47, 29 July 2023

2023-07-29T15:47:39Z

← Older revision		Revision as of 15:47, 29 July 2023
Line 1:		Line 1:
	<NOINCLUDE>		<NOINCLUDE>
	{T1 icon}{T4S icon}{T8S icon}		{{T1 icon}}{{T4S icon}}{{T8S icon}}
	<div class="tocdiv">		<div class="tocdiv">
	<div>__TOC__</div>		<div>__TOC__</div>

ST at 15:47, 29 July 2023

2023-07-29T15:47:03Z

← Older revision		Revision as of 15:47, 29 July 2023
Line 1:		Line 1:
	<NOINCLUDE>		<NOINCLUDE>
			{T1 icon}{T4S icon}{T8S icon}
	<div class="tocdiv">		<div class="tocdiv">
	<div>__TOC__</div>		<div>__TOC__</div>

ST: /* Video with T1 */

2021-08-22T03:02:29Z

Video with T1

← Older revision		Revision as of 03:02, 22 August 2021
Line 47:		Line 47:
	<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">		<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">
	<div class="fluid-width-video-wrapper" style="padding-top: 0%;">		<div class="fluid-width-video-wrapper" style="padding-top: 0%;">
	<iframe ~~allowfullscreen~~="~~allowfullscreen" frameborder="0~~" height="315~~" id="fitvid0" name="fitvid0~~" src="https://www.~~bosepro~~.~~community~~/~~video-~~embed/t/0~~/c/22701135270234856/p/22560397759552554~~" ~~width~~="~~560~~"></iframe>		<iframe width="560" height="315" src="https://www.youtube.com/embed/5UUwve-T0KM" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
	</div>		</div>
	</div>		</div>

ST at 15:20, 10 March 2020

2020-03-10T15:20:47Z

← Older revision		Revision as of 15:20, 10 March 2020
Line 1:		Line 1:
	{{Noise Gate}}		<NOINCLUDE>
			<div class="tocdiv">
			<div>__TOC__</div>
			<div><h3>Introduction</h3>
			One cause of feedback is open microphones on the stage. You can use the '''Noise Gate''' in your ToneMatch mixer to shut down microphones that are not being used. When the sound presented to the microphone is loud enough (it reaches a predefined threshold), the gate will open allowing sound through.
			</div>
			</div>
			</NOINCLUDE>
			<INCLUDEONLY>
			One cause of feedback is open microphones on the stage. You can use the '''Noise Gate''' in your ToneMatch mixer to shut down microphones that are not being used. When the sound presented to the microphone is loud enough (it reaches a predefined threshold), the gate will open allowing sound through.
			</INCLUDEONLY>

			=== Initial Setup for a Microphone ===
			You can use the Comp/Gate Noise Gate to automatically turn off a microphone when it is not being used. This can reduce unwanted background noise and increase the gain-before-feedback of your system.

			The Noise Gate prevents signals below a certain volume level (threshold) from reaching the outputs of the mixer. You set that certain volume level by setting the '''Thresh'''old parameter.


			# Press the '''CHEDIT''' button on the channel you want to control
			# Turn the Rotary Selector to '''COMP/GATE'''
			# Under the display, turn the Type button so you can see the menu
			# Select '''Noise Gate'''
			# Set the Thresh to '''-40.0dB'''
			# (T4S/T8S) Leave Ramp/Speed at '''50%''' (T4S/T8S)

			=== Fine-Tuning ===
			If the Noise Gate cuts off the microphone even while you are speaking directly into it try setting the Thresh to -50.0dB. You may have to experiment with the Thresh and Speed to get the Noise Gate to work with different vocalists and microphones.

			Notes
			;Thresh :Rotate the Thresh control to adjust the input threshold (trigger) level from –90 dB to –30 dB.
			: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate
			;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).
			: You may find a slower Speed (higher value) gives a more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.
			;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.
			:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different from Speed which affects how quickly the gate clamps down after the signal has passed.
			:You may set the Ramp closer to 100% so the beginnings of phrases are allowed through rather than ramping up the volume slowly.

			<!--
			<br>The Ramp/Speed describes a ratio of how the noise gate attenuates the sound once the threshold has been reached (how quickly the reduction is applied).
			-->

			=== Video with T1 ===
			The same principles apply to the T4S/T8S, but they have the Ramp control.

			<html>
			Here's a quick video to show you how to use the Noise Gate with the T1. If you have the T4S/T8S, see the notes above about working with the Ramp control.
			<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">
			<div class="fluid-width-video-wrapper" style="padding-top: 0%;">
			<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" id="fitvid0" name="fitvid0" src="https://www.bosepro.community/video-embed/t/0/c/22701135270234856/p/22560397759552554" width="560"></iframe>
			</div>
			</div>

			</html>


			<NOINCLUDE>
			For more tips see:[[Microphone Feedback]]
			</NOINCLUDE>


			----
			[[Category:T1]]
			[[Category:T4S]]
			[[Category:T8S]]
			[[Category:Comp/Gate]]
			[[Category:Noise Gate]]
			[[Category:Effects]]
			[[Category:T1 Videos]]
			[[Category:Feedback]]

ST: Replaced content with "{{Noise Gate}}"

2020-03-10T15:19:24Z

Replaced content with "{{Noise Gate}}"

← Older revision		Revision as of 15:19, 10 March 2020
Line 1:		Line 1:
	~~<div class="tocdiv">~~		{{Noise Gate}}
	~~<div>__TOC__</div>~~
	~~<div><h3>Introduction</h3>~~
	~~One cause of feedback is open microphones on the stage. You can use the '''~~Noise Gate''' in your ToneMatch mixer to shut down microphones that are not being used. When the sound presented to the microphone is loud enough (it reaches a predefined threshold), the gate will open allowing sound through.
	~~</div>~~
	~~</div>~~

	~~=== Initial Setup for a Microphone ===~~
	~~You can use the Comp/Gate Noise Gate to automatically turn off a microphone when it is not being used. This can reduce unwanted background noise and increase the gain-before-feedback of your system.~~

	~~The Noise Gate prevents signals below a certain volume level (threshold) from reaching the outputs of the mixer. You set that certain volume level by setting the '''Thresh'''old parameter.~~


	~~# Press the '''CHEDIT''' button on the channel you want to control~~
	~~# Turn the Rotary Selector to '''COMP/GATE'''~~
	~~# Under the display, turn the Type button so you can see the menu~~
	~~# Select '''Noise Gate'''~~
	~~# Set the Thresh to '''-40.0dB'''~~
	~~# (T4S/T8S) Leave Ramp/Speed at '''50%''' (T4S/T8S)~~

	~~=== Fine-Tuning ===~~
	If the Noise Gate cuts off the microphone even while you are speaking directly into it try setting the Thresh to -50.0dB. You may have to experiment with the Thresh and Speed to get the Noise Gate to work with different vocalists and microphones.

	~~Notes~~
	~~;Thresh :Rotate the Thresh control to adjust the input threshold (trigger) level from –90 dB to –30 dB.~~
	~~: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate~~
	~~;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).~~
	~~: You may find a slower Speed (higher value) gives a more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.~~
	~~;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.~~
	:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different from Speed which affects how quickly the gate clamps down after the signal has passed.
	~~:You may set the Ramp closer to 100% so the beginnings of phrases are allowed through rather than ramping up the volume slowly.~~

	~~<!--~~
	~~<br>The Ramp/Speed describes a ratio of how the noise gate attenuates the sound once the threshold has been reached (how quickly the reduction is applied).~~
	~~-->~~

	~~=== Video with T1 ===~~
	~~The same principles apply to the T4S/T8S, but they have the Ramp control.~~

	~~<html>~~
	~~Here's a quick video to show you how to use the Noise Gate with the T1. If you have the T4S/T8S, see the notes above about working with the Ramp control.~~
	~~<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">~~
	~~<div class="fluid-width-video-wrapper" style="padding-top: 0%;">~~
	<iframe allowfullscreen="allowfullscreen" frameborder="0" height="315" id="fitvid0" name="fitvid0" src="https://www.bosepro.community/video-embed/t/0/c/22701135270234856/p/22560397759552554" width="560"></iframe>
	~~</div>~~
	~~</div>~~

	~~</html>~~





	~~----~~
	~~[[Category:T1]]~~
	~~[[Category:T4S]]~~
	~~[[Category:T8S]]~~
	~~[[Category:Comp/Gate]]~~
	~~[[Category:Noise Gate]]~~
	~~[[Category:Effects]]~~
	~~[[Category:T1 Videos]]~~
	~~[[Category:Feedback]]~~

ST: /* Fine-Tuning */

2020-01-13T20:21:10Z

Fine-Tuning

← Older revision		Revision as of 20:21, 13 January 2020
Line 28:		Line 28:
	: You may find a slower Speed (higher value) gives a more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.		: You may find a slower Speed (higher value) gives a more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.
	;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.		;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.
	:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different ~~than~~ Speed which affects how quickly the gate clamps down after the signal has passed.		:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different from Speed which affects how quickly the gate clamps down after the signal has passed.
	:You may set the Ramp closer to 100% so the beginnings of phrases are allowed through rather than ramping up the volume slowly.		:You may set the Ramp closer to 100% so the beginnings of phrases are allowed through rather than ramping up the volume slowly.

ST: /* Fine-Tuning */

2020-01-13T20:16:12Z

Fine-Tuning

← Older revision		Revision as of 20:16, 13 January 2020
Line 26:		Line 26:
	: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate		: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate
	;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).		;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).
	: You may find a slower Speed ~~the~~ more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.		: You may find a slower Speed (higher value) gives a more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.
	;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.		;Ramp (T4S/T8S only) :Press the Speed control button to access the Ramp control. Press the Ramp control button to switch back to Speed.
	:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different than Speed which affects how quickly the gate clamps down after the signal has passed.		:Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical). The Ramp parameter is the slope of the opening gate allowing signal through. It can be thought of and perceived through time. A steep ramp (100%) will open quick and aggressively, while a shallow ramp (0%) opens slow and more gradually. This is different than Speed which affects how quickly the gate clamps down after the signal has passed.

ST: /* Video with T1 */

2020-01-11T19:02:51Z

Video with T1

← Older revision		Revision as of 19:02, 11 January 2020
Line 39:		Line 39:

	<html>		<html>
	Here's a quick video to show you how to ~~do it~~.		Here's a quick video to show you how to use the Noise Gate with the T1. If you have the T4S/T8S, see the notes above about working with the Ramp control.
	<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">		<div class="fluid-width-video-wrapper-container" style="max-width: 560px; max-height: 315px;">
	<div class="fluid-width-video-wrapper" style="padding-top: 0%;">		<div class="fluid-width-video-wrapper" style="padding-top: 0%;">

ST: /* Fine-Tuning */

2020-01-11T19:01:00Z

Fine-Tuning

← Older revision		Revision as of 19:01, 11 January 2020
Line 24:		Line 24:
	Notes		Notes
	;Thresh :Rotate the Thresh control to adjust the input threshold (trigger) level from –90 dB to –30 dB.		;Thresh :Rotate the Thresh control to adjust the input threshold (trigger) level from –90 dB to –30 dB.
	: -90 dB is the ~~least~~ sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate		: -90 dB is the most sensitive setting letting in the most sound. As you move toward -30 dB, it will require more volume to open the Noise Gate
	;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).		;Speed :Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).
	: You may find a slower Speed the more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.		: You may find a slower Speed the more gradual the cut-off, and this may sound more natural as a singer naturally lowers their volume at times.