L1 Pro to S1 Pro - Revision history

ST at 17:11, 26 September 2024

2024-09-26T17:11:52Z

← Older revision		Revision as of 17:11, 26 September 2024
Line 4:		Line 4:
	#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two		#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two
	#* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so connect it to one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL.		#* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so connect it to one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL.
	#* The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. ~~See~~ the ~~picture at~~ the ~~bottom of this article for details~~.		#* The {{S1 Pro}} XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output may be too hot for the XLR inputs. If you see solid red on the {{S1 Pro}} turn down the channel volume.
	#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.		#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.

ST at 16:43, 19 August 2024

2024-08-19T16:43:01Z

← Older revision		Revision as of 16:43, 19 August 2024
Line 1:		Line 1:
	{{L1 Pro icon}} {{S1 Pro icon}}		{{L1 Pro icon}} {{S1 Pro icon}}
	To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the ~~loudspeaker~~		To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension to the L1 Pro

	#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two		#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two

ST at 05:41, 27 August 2022

2022-08-27T05:41:51Z

← Older revision		Revision as of 05:41, 27 August 2022
Line 3:		Line 3:

	#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two		#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two
	* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so ~~use~~ one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL. The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. See the picture at the bottom of this article for details.		#* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so connect it to one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL.
			#* The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. See the picture at the bottom of this article for details.
	#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.		#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.

ST at 05:38, 27 August 2022

2022-08-27T05:38:53Z

← Older revision		Revision as of 05:38, 27 August 2022
Line 3:		Line 3:

	#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two		#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two
			* Note: The L1 Pro Line Output (XLR) is LINE LEVEL so use one of the S1 Pro 1/4 inch (6.3 mm) inputs. These are also LINE LEVEL. The S1 Pro XLR inputs are MICROPHONE LEVEL, and the L1 Pro LINE LEVEL output is too hot for the XLR inputs. See the picture at the bottom of this article for details.
	#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.		#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.

ST: Created page with "{{L1 Pro icon}} {{S1 Pro icon}} To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the loudspeaker #Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-..."

2021-08-31T23:30:55Z

Created page with "{{L1 Pro icon}} {{S1 Pro icon}} To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the loudspeaker #Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-..."

New page

{{L1 Pro icon}} {{S1 Pro icon}}
To connect an L1 Pro system to an {{S1 Pro}} as a monitor or an extension of the loudspeaker

#Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to the {{S1 Pro}} inputs one or two
#Set the volume on the {{S1 Pro}} to 10:00 o'clock and then adjust to suit the application. If you see solid red on the {{S1 Pro}} turn down the channel volume.

;Note:
The L1 Pro Line Out is post-fader. That is, it is the combined signal of all inputs and ToneMatch processing, EQ and Reverb. That includes inputs, 1, 2, 3, Bluetooth, and ToneMatch Port (used for {{ToneMatch Mixers}}).

The Line Out is pre-System EQ. That is, the signal at the Line Out is flat. It is not affected by the setting of the System EQ switch. <ref>[https://www.facebook.com/groups/BoseL1/permalink/10159715041622446/?comment_id=10159715092547446 Craig Small - Bose]</ref>

This applies to any L1 Pro system (L1 Pro8, L1 Pro16, L1 Pro32).

[[File:L1 Pro Daisy S1 Pro.jpg|400px|L1 Pro Daisy S1 Pro Chain]]

----
[[Category:L1 Pro]]
[[Category:S1 Pro]]
[[Category:Connections]]