View source for Preset for Double Bass with Schertler DYN-B

{{Classic icon}} {{Model I icon}}

Quoting [http://bose.infopop.cc/eve/personal?x_myspace_page=profile&u=4891046325 Monte] from the {{forum}}

: ... #60 has been good to me but I have to drastically cut the mids on the remote. Sounds pretty great until it gets loud, and then the bass gets a little hollow. I ended up using #83 with the band pass, and instant great acoustic sound!! I ran flat on the eq and the sound was hands down the best live sound I have ever gotten.

:At the end of the night some of the guys from the Shoals were in and the keyboard and guitar turned up. The vocalist at the bar motioned I needed to turn up. Still sounded the same, but it was LOUD. Still sounded just like my bass sans amplification.

:Unless anyone does an EQ setting for the SChERtLER Dyn family (Hint?!?) this one works really well for me. It was actually better than using channel 3 with my dedicated Schertler acoustic preamp.




[http://bose.infopop.cc/eve/forums/a/tpc/f/6366055944/m/9181016213?r=6111056325#6111056325 Original Post]


Notes:
* [http://toonz.ca/bose/wiki/index.php?title=Presets_2.0 Presets 2.0] mentioned above
** 60 Upright 3/4 Bass w/ Fishman pickup Basses
** 83 50 Hz / 5 KHz Band Pass Utility
* {{T1 icon}}{{T1}} Preset equivalent to #83 above <br />Category: Utility<br />Preset: 50HZ-5kHz Bandpass


* [http://www.schertler.com/prodotti_ing/pickups/double_bass_DYN-B.htm SChERtLER DYN-B]

----
[[Category:Presets]]